Chapter 4. Configure Advanced Settings; Uefi Bios Setup Utility; What Is Uefi Bios Setup Utility; Enter The Uefi Bios Setup Utility - Lenovo E41-55 User Manual

Hide thumbs Also See for E41-55:

Table of Contents

Chapter 4. Configure advanced settings

UEFI BIOS setup utility is the first program that the computer runs. When the computer turns on, UEFI BIOS

setup utility performs a self test to make sure that various devices in the computer are functioning.

UEFI BIOS is the first program that the computer runs when the computer is turned on. UEFI BIOS initializes

the hardware components and loads the operating system and other programs. Your computer might come

with a setup utility with which you can change the UEFI BIOS settings.

Restart the computer. When the logo screen is displayed, press F2 to enter the UEFI BIOS setup utility.

You might need to change the startup sequence to allow the computer to start from another device or a

network location.

1. Enter the setup utility.

2. Navigate to the Boot menu.

3. Follow the on-screen instructions to change the order of devices under Boot Priority Order.

Note: You can also change the startup sequence temporarily without opening the setup utility. To do so,

start the computer. When the logo screen is displayed, press F12.

1. Open the setup utility.

2. Select Configuration ➙ Hotkey Mode and press Enter.

3. Change the setting to Disabled or Enabled.

4. Select Exit ➙ Exit Saving Changes.

This section introduces the types of passwords that you can set in the setup utility.

You can set various types of passwords in the UEFI BIOS setup utility.

Notes:

• All passwords set in the setup utility consist of alphanumeric characters only.

• If you start the setup utility using the user password, you can only change a few settings.

Table of Contents