Operation - Sony BVR-55 Operation And Maintenance Manual

SECTION 1 OPERATION
1-1. INTRODUCTION
The BVR-55/55P/55PM is a remote control unit to control a plug-in type time base
corrector and a digital noise reducer for a U-matic VTR.
This unit can control the following equipment :
Model name Time base Digital noise
(signal system) corrector reducer"
BVR-55 (for NTSC) BKU-901/901A_ | BKU-902
BVR-55P (for PAL) BKU- 903/903A | BKU-904
BKU-907 BKU-908
BVR-55PM (for PAL-M)
Functions to be controlled
Co
VIDEO VIDEO VIDEO
CHROMA CHROMA CHROMA
SET UP BLACK LEVEL SET UP
HUE
SYSTEM SYNC
SYSTEM SC
NOISE REDUCTION**
FREEZE**
BURST/CHROMA
SYSTEM SYNC
SYSTEM SC
NOISE REDUCTION**
FREEZE **
CHROMA PHASE
SYSTEM SYNC
SYSTEM SC
NOISE REDUCTION**
FREEZE **
Preset function
The controls other than SYNC PHASE and SC PHASE are equipped with the preset
switches. At the PRESET position, the controls do not affect the output signals.
Rack mounting
The unit can be installed into a 19-inch standard rack. For details, please refer to
Section 2.
* A digital noise reducer should be used together with a
time base corrector. It cannot operate by itself.
x * These functions can be controlled only when a digital
noise reducer is installed into the BVU-950/950P/950PM
U-matic video cassette recorder.
1-1 (E)