Table of Contents
Advertisement
Answering system
Answering system messages are
stored on your telephone's built-in
recording device.
By default, the answering system is set
to receive message after 4 rings if no
one picks up.
When you have a new answering
system message: "New message" is
displayed on the handset.
Voicemail is a service offered by your
telephone provider. Messages are
stored in their system and accessed
remotely.
When you have a new voicemail:
"Voicemail msg. via phone
co." will be displayed on the handset.
Important:
R Make sure the unit's date and time
setting is correct (page 12).
Turning the answering
system on/off
Base unit
Press MANSWER ON/OFFN to turn on/
off the answering system.
Handset
1
To turn on:
MMENUN#327
To turn off:
MMENUN#328
2
MOFFN
Note for base unit and handset:
R When the answering system is
turned on, the message counter on
the base unit displays the total
number of messages (old and new).
For assistance, please visit https://shop.panasonic.com/support
Listening to messages
Using the base unit
When new messages have been
recorded, the message indicator (
on the base unit flashes.
Press M
N (PLAY).
Operating the answering system
during playback
Key
Operation
MjN or MkN Adjust the speaker
volume
M
N
Repeat message
M
N
Skip message
M
N
Stop playback
(STOP)
MERASEN
Erase currently
playing message
*1
If pressed within the first 5
seconds of a message, the
previous message is played.
Using the handset
When new messages have been
recorded, "New message" is
displayed.
1
To listen to new messages:
MMENUN#323
To listen to all messages:
MMENUN#324
2
When finished, press MOFFN.
Operating the answering system
MMENUN a MbN: "Answering
device" a MSELECTN
Getting Started
*1
)
19
Advertisement
Table of Contents
