Table of Contents
Advertisement
MN004482A01-AN
Chapter 7: Advanced Features
2. Perform one of the following actions:
●
or
to Preset for the preset preprogrammed Talkgroup.
●
or
to the required talkgroup.
●
Use the keypad to enter the number of the corresponding Talkgroup in the list.
3. Press the Menu Select button directly below Sel to save the currently selected talkgroup and return
to the Home screen.
If the encryption key associated to the new Talkgroup is erased, you hear a momentary key fail tone
and the display shows Key fail.
If the encryption key that is associated to the new Talkgroup is not allowed, you hear a momentary key
fail tone and the display shows Illegal key.
4. Press
to return to the Home screen.
7.2.3
Sending a Status Call
This feature allows you to send data calls to the dispatcher about a predefined status. Each status can have
up to a 14-character name. For trunking, a maximum of eight status conditions is possible. For conventional,
a maximum of 16 status conditions is possible.
Procedure:
1. Perform one of the following actions:
●
Press the preprogrammed Status button.
●
or to Sts and press the Menu Select button directly below Sts.
The display shows the last acknowledged status call, or the first status in the list.
2. Perform one of the following actions:
●
or
to the required status.
●
Use the keypad to enter a number corresponding to the location in the status list.
3. Press the PTT button to send the status.
When the dispatcher acknowledges, you hear four tones and the display shows Ack received. The
radio returns to normal dispatch operation.
If no acknowledgment is received, you hear a low-pitched tone and the display shows No
acknowledge.
4. Press
to return to the Home screen.
No traffic is heard on trunked channels while Status Call is selected. If the radio detects no Status Call
activity for 6 seconds, an alert tone sounds until you press
7.2.4
Making Priority Dispatch Calls
If a talkgroup is congested, the Priority Dispatch feature allows you to call the dispatcher on a different
talkgroup. This talkgroup is called the Priority Talkgroup. Each trunking talkgroup can have its own assigned
54
or the PTT button.
Advertisement
Table of Contents
