Integrated Storage Controller Card; Removing The Integrated Storage Controller Card - Dell DR4300e Owner's Manual

Figure 30. Installing the cable retention bracket
1. alignment pin (2)
3. tab
Next steps
1. Install the PCIe card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.
Related Links
Safety instructions
Before working inside your system
Removing the cooling shroud
Removing the PCIe card holder
Installing the cooling shroud
Installing the PCIe card holder
After working inside your system

Integrated storage controller card

Your system includes a dedicated expansion card slot on the system board for an integrated controller
card. The integrated storage controller card provides the integrated storage subsystem for the internal
hard drives in your system. The controller supports SAS and SATA hard drives and also enables you to set
up the hard drives in RAID configurations. The RAID configurations depend on the version of the storage
controller included with your system.

Removing the integrated storage controller card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
96
2. keyhole slot
4. cable retention bracket