Table of Contents
Advertisement
8. Channels
8.1. About Channels and
Switch Channels
To watch TV channels
• Press . The TV tunes to the TV channel you last
watched.
• Press (Home) > TV > Channels and press OK.
• Press + or - to switch channels.
• If you know the channel number, type in the number
with the number keys. Press OK after you entered the
number to switch channels.
• To switch back to the previously tuned channel,
press Back.
To switch to a channel from a channel list
• While watching a TV channel, press OK to open the
channel lists.
• The channel list can have several pages with channels.
To view the next or previous page, press + or -.
• To close the channel lists without switching channels,
press Back or EXIT.
Channel icons
After an Automatic channel update of the channel list,
newly found channels are marked with a (star).
If you lock a channel, it will be marked with a (lock).
Radio channels
If digital broadcasting is available, digital radio stations
are installed during installation. Switch to a radio
channel just like you switch to a TV channel.
This TV can receive digital television standard DVB. TV
may not work properly with some operators of digital
television , non-compliance with requirements of the
standard in full.
8.2. Install Channel
Antenna and Cable
Manually Search for Channels and Channel Settings
Search for Channels
Update channels
(Home) > Settings > Channels > Antenna/Cable
installation > Search for channels
1 - Select Start now and press OK.
2 - Select Update channels to only add new digital
channels.
3 - Select Start and press OK to update channels. This can
take a few minutes.
Quick reinstall
(Home) > Settings > Channels > Antenna/Cable
installation > Search for channels
1 - Select Start now and press OK.
2 - Select Quick reinstall to install all channels again with
default settings.
3 - Select Start and press OK to update channels. This can
take a few minutes.
Advanced reinstall
(Home) > Settings > Channels > Antenna/Cable
installation > Search for channels
1 - Select Start now and press OK.
2 - Select Advanced reinstall to do a full re-installation
which takes you through each step.
3 - Select Start and press OK to update channels. This can
take a few minutes.
Channel Settings
(Home) > Settings > Channels > Antenna/Cable
installation > Search for channels > Advanced reinstall
1 - Select Start now and press OK.
2 - Select Advanced reinstall to do a full re-installation
which takes you through each step.
3 - Select Start and press OK.
4 - Select the country where you are now and press OK.
5 - Select Antenna (DVB-T) or Cable (DVB-C), and select
one item you need to re-install.
6 - Select Digital and analogue channels, Only digital
channels, or Only analogue channels.
7 - Select Settings and press OK.
8 - Press
Reset to reset, or press
complete the settings.
Frequency scan
Select the method of searching for channels.
• Quick: select the faster method and use the predefined
settings used by most cable providers in your country.
• Full: If this results in having no channels installed or if
some channels are missing, you can select the
extended Full method. This method will take more time
to search for and install channels.
• Advanced: If you received a specific network frequency
value to search for channels, select Advanced.
Frequency step size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if some
channels are missing, you can search in smaller steps
of 1MHz. Using the 1MHz steps will take more time to
search for and install channels.
Network frequency mode
20
Done when
Advertisement
Table of Contents
