Specifications - Pioneer A-300X Operating Instructions Manual

| SPECIFICATIONS
Amplifier Section
Continuous power output (both channels driven at 20 Hz to 20 kHz)*
T.H.D. 0.03 %, 8 & . 30W + 30W
T.H.D, 0,05 %,42 .40W + 40W
DIN Continuous power output {both channels driven at 1 kHz)
THAD: 120. 90¢ BD is, ccicrsnvesesteueedentignencbeaaestee> 40W + 40W
ThH.D. 1.0 9, A Qi ciccccccnecee eee en terete eneeeeee enn e ee 60 W + GOW
Dynamic power output (on EIA dynamic test signal}
80/4 2/20 -. 50 W/75 W/S0 W
Total harmonic distortion*
20 Hz to 20 kHz, 30 W, 8.
20 Hz to 20 kHz, 40 W, 40.
Input sensitivity/impedance
PHONO (MM)
CD, TUNER, LINE, TAPE
PHONO overload level
« 2.5 mV/50 k2
- 150 mV/50 kQ
1 KHz, T.H.D. 0.02 % (MM) .........ccceeeceereeereeeerererereees 150 mV
Output level/impedance
TAPEAREC vinci cis occnvend cxdecntsies ctevlanssaaterdsdcnespccvens 150 mV/1 kQ
Frequency response
PHONO (MM) 20 Hz to 20 kHz +0.3 dB
CD, TUNER, LINE, TAPE .. BHz to 100 kHz, *$.dB
Signal-to-Noise ratio (IHF short circuit, A network)
PHONO (MM, 2.5 mV input) .
CD, TUNER, LINE, TAPE .
Signal-to-Noise ratio (DIN, continuous power/50 mW)
PHONO (MM) ....-sscsrccsesvecssceescetbensvoesecsercaseccsrecs 73 dB/63 dB
CD, TUNER, LINE, TAPE .........:ecceseeeeeeererereeeeeeeees 88 dB/65 dB
« 83 dB
. 108 dB
Power Supply/Miscellaneous
Power requirements - ac. 240 V~, 50/60 Hz
Power CONSUMPUGN ...-200.csstsscesedecssacaqsecesoseds caces ci vederiens 410W
Dimensions . 420 (W) x 352 (D} x 126 (H) mm
Weight (without package) .........--...0606 asisnauivescgesseos dvvedea 6.8 kg
Accessories
Operating instructions ...........cceeeeecee cn eneeeeeeaneseeer ee ennenenenreees |
® Specifications and design subject to possible modification without
notice, due to improvements.
* Measured by Audio Spectrum Analyzer.
Published by Pioneer Electronic Corporation.
Copyright © 1992 Pioneer Electronic Corporation.
All rights reserved
<Q92EO1FF6MO1>
Printed in Japan <ARB1391-A>