KitchenAid Artisan 5KSM125 Manual page 10

USING THE STAND MIXER
Hold the locking lever in the UNLOCK
2
position and tilt motor head back.
To remove accessory: Repeat steps 1
and 2. Press accessory upward
4
as far as possible and turn to the
left. Then pull accessory from the
beater shaft.
Slip accessory onto beater shaft and
press upward as far as possible. Then,
3
turn accessory to the right, hooking
accessory over the pin on the shaft.
USING THE STAND MIXER | 13