Advertisement
* Dismounting the Flywheels
1. Remove the two screws, and then remove the cover.
2. Take off E washer.
Retain washer properly to ensure it
doesn't get lost.
3. Remove
the flywheels.
Do not mistake
the N and R
flywheels.
¢ Dismounting the Motor Unit
1. Remove the two screw, and then remove motor unit.
2. ADJUSTMENT
21 AZIMUTH ADJUSTMENT
¢ To Adjust
1. Play "A" side of NCT-110 (10kHz,
—10dB). Adjust each
.screw
for
maximum
output
in forward
and
reverse
directions.
2. Play "B" side in forward and reverse directions to confirm
adjustment.
2.2 TAPE SPEED ADJUSTMENT
¢ To Adjust
1. Reproduce NCT-111 (3 kHz, —10 dB). Adjust the semifixed
resistor so that frequency counter shows 3,010 Hz (+80 Hz,
-—40 Hz).
CxX-175
|
Motor Unit—-!
ae
PS
ae
E Type
Washer
Fig. 4
Semitixed
resistor
for
adjustment
of tape
speed
Motor
Unit
Reverse
azimuth
adjustment
Forword azimuth
adjustment
Fig. 5
Advertisement
