Table of Contents
Advertisement
Connect to a Computer
(USB)
You can use the USB cable to connect the Pocket
Project to a computer. In this way, you are able to copy
files back and forth between the internal memory, an
inserted memory card and the computer. You can also
delete the files. You can playback the files saved on the
Pocket Projector on your computer.
1 Switch the device on using the on/off switch on the
side.
2 After the initial screen the main menu appears.
3 Connect the mini-USB port to the Pocket Projector
and the USB socket to the computer.
4 A confirmation screen appears when the devices are
connected successfully.
19
5 Confirm to enable the connection.
Notice
Successful Connection
You cannot use the memory for media
playback when the Pocket Projector is
connected to a computer via USB. Use
WiFi Streaming instead (see also Directly
Connecting Projector to Computer using
WLAN (WiFi Streaming), page 17).
6 If a memory card has been inserted, it will be dis-
played as another disk drive.
7 You can move, copy or delete data from the compu-
ter, the memory card (if inserted) and the internal
memory.
Philips · PPX3614
Advertisement
Table of Contents
