Table of Contents
Advertisement
System control operation
Connection
Using the system control cords provided with KENWOOD
system component models, make connec-
tions as shown
below.
Notes on using audio timer
To record a broadcast program us-
ing an audio timer, be sure to set
the input selector to TUNER, then
Turntable
a
a
@ For a cassette deck to be
subject to system control
operation, it must be con-
nected to the TAPE
1
jacks.
Cassette deck
H Connection of the audio cords and system con-
trol cord
Make sure that the audio cords are connected correctly right
and left as in the figure.
If the system control cord and audio cords are not connected
properly, the automatic system governing remote control and
system functions will not operate.
(For connections of the audio cords, refer to the ''System con-
nections"' diagram.)
oe Ee
18 kR-Vve020 (En)
turn off the power.
for Europe
To AC outlet
Acti0:120V~4 220v~
pa24ov~
va
outlet
CAUTION
:
ATTENTION:
wareoance
eeuecron
System control
cord
for Europe
—_
To AC
outlet
By connecting this unit to KENWOOD cassette deck, CD play-
er, and turntable models equipped with system control jacks,
the following integrated operation features become available.
Operation
1. Automatic play operation
When starting play with the turntable, cassette deck, or CD
player connected to the receiver, press the desired input
selector keys on the receiver. The turntable, cassette deck,
or CD player will automatically enter play mode.
In the same way, pressing the Play key of the turntable, cas-
sette deck, or CD player will automatically switch the input
selector on the receiver to the component on which the Play
key is pressed.
2. Synchro recording
To record the sound from the CD player or turntable onto
a tape with the cassette deck, press the CD or PHONO of
the input selector switch and load a CD or record. Set the
cassette deck to rec pause mode, then press the PLAY
(START) key of the CD player or turntable. The cassette deck
will start recording automatically, synchronized with the CD
player or turntable starting play.
3. Remote control
The remote control unit provided with this unit, to which
a KENWOOD system turntable, cassette deck, or CD play-
er is connected, is equipped with related contro! keys. The
related components can be controlled using these keys.
Note:
During recording with a cassette deck, the input selector on the
receiver is fixed at the source from which the recording is made,
by the system control circuit. At this time pressing any of the in-
put selector keys has no effect.
Advertisement
Table of Contents
