System Connection; Automatic Operation - Kenwood KR-A5060 Instruction Manual

System connection (KR-A5060
Make connection as shown below. When connecting the related system components, refer also to the instruction manuals of
the related components.
: Do not plug in the power lead until all connections are completed.
VIDEO DECK 1 VIDEO DECK 2
Audio cord Audio cord
SPEAKER IMPEDANCE SELECTOR
AC outlets Except
for Australia
Tape deck 2
Turntable
coo oc
om
CD player ane REC PLAY oe
N Tape deck 1 2
YS | f?
System control cord
Automatic operation
When this unit is connected to KENWOOD system components such as a cassette deck and CD player through system control cords and the input
source is sclected with the INPUT SELECTOR, the selocted component starts to play automatically. Inversely, playing a component automatically
selects that source as the input to this unit. The automatic operation also occurs when the provided remote control is used.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
3. Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
4. Insert the system control plugs completely into the jacks.
5. tf tie system contro! cords or audio cords are not connected properly, the remote control or automatic operation between system
components will not work property.
RODS y
ee