Table of Contents
Advertisement
ID CARD LED
❏ Comes on when the printer is ready to process ID cards.
❏ Flashes when the printer is waiting for card insertion or removal.
CLEANING Button
When printing becomes faint or uneven, press this button for more than
three seconds. The printing section inside the printer will be cleaned
automatically, and the printing will be back to normal.
Note:
Press this button for more than three seconds only when the INK LED is not lit
or flashing.
Pressing the CLEANING button unecessarily leads to a waste of ink.
FEED Button
Press this button to feed the roll paper.
Power Switch and Power Switch Cover
Press the power switch to turn on or off the printer.
Note:
Never open a cover or turn off the printer while the POWER LED is flashing.
WARNING :
If a machine failure has occurred
while the included power switch
cover is attached, unplug the
power cable immediately.
Continued use may result in a fire
hazard.
The power switch cover is
intended to prevent the power
switch from being pressed
accidentally. To use the cover,
place it over the power switch.
When turning on or off of the
switch is required, insert a pointed
object into one of the holes of the
cover, and press the switch.
When the printer is stored or not in use for an extended period, turn off the
power switch and disconnect the power cord.
TM-J9000/J9100 User's Manual 9
English
Advertisement
Table of Contents
