Table of Contents
Advertisement
Switching the Paper Source to Match the Purpose
This printer has two paper sources: Roll Paper and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1.
1. Select Quality & Media from Printer Options in the
2.
2. Select the media type
For Media Type, select the same paper type loaded in the printer.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
3. Select the paper source
3.
For Paper Source, select the item below that matches your purpose.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut sheet.
4.
4. Complete the setup
Click Print.
When you execute print, the printer uses the specified paper source to print the data.
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer,
an error message may appear on the printer's operation panel. You can still print but you may not
be able to obtain correct print results.
Print Dialog
138
Advertisement
Table of Contents
Troubleshooting
