Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSE76737P
Summary of Contents for AEG FSE76737P
- Page 1 FSE76737P User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............29 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH • Do not use multi-plug adapters and mains socket. Contact the Authorised extension cables. Service Centre to replace the water • Make sure not to cause damage to inlet hose. the mains plug and to the mains 2.4 Use cable.
-
Page 6: Installation
If the plastic cover is damaged, contact the Authorized Service www.youtube.com/electrolux Centre to replace it with the new one. www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher min. 560 1240 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury. -
Page 7: Product Description
ENGLISH 5 mm 4. PRODUCT DESCRIPTION... -
Page 8: Control Panel
Ceiling spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container Air vent 4.1 Internal light The lamp goes off when you close the door or switch the appliance off. -
Page 9: Programme Selection
ENGLISH 5.3 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. Refer to "Before first use". Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. - Page 10 GlassCare The option prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C. GlassCare prevents delicate load, glassware in particular, from damaging. 6.4 Programmes overview Pro‐ Dishwasher Degree of Programme phases EXTRAS...
-
Page 11: Basic Settings
ENGLISH Pro‐ Dishwasher Degree of Programme phases EXTRAS gramme load soil Machine For cleaning the appliance • Cleaning 70 °C Not applicable Care interior. Refer to "Care and • Intermediate rinse Cleaning". • Final rinse • AirDry 1) Automatic door opening during the drying phase. Refer to "Basic settings". Consumption values Water (l) Energy (kWh) - Page 12 Number Setting Values Description Auto door open On (default) Activate or deactivate the AirDry. Key tones On (default) Activate or deactivate the sound of the but‐ tons when pressed. Latest pro‐ Enable or disable the automatic selection gramme selec‐...
- Page 13 ENGLISH • The current setting value flashes. a negative effect on the washing results 3. Press Previous or Next to change and on the appliance. the value. The higher the content of these minerals, 4. Press OK to confirm the setting. the harder your water is.
- Page 14 All the consumption values programme end. mentioned in this section are determined in line with the Water softener lev‐ Amount of water currently applicable standard in laboratory conditions with water hardness 2.5mmol/L...
-
Page 15: Before First Use
ENGLISH The latest programme that was completed before the appliance deactivation is saved. It is then selected automatically after you activate the appliance. When the latest programme selection is disabled, the default programme is ECO. 7.8 TimeBeam AirDry is automatically activated with all programmes. - Page 16 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes.
-
Page 17: Daily Use
ENGLISH 4. Close the lid. Make sure that the lid Fill the rinse aid dispenser locks into position. when the indicator (A) is clear. 9. DAILY USE 1. Open the water tap. For information about the 2. Press and hold until the appliance detergent dosage, refer to is activated. - Page 18 • The ECOMETER indicates the When the countdown is complete, the updated level of energy and water programme starts. consumption. 9.6 How to cancel the delay By default, options must be start while the countdown activated every time before operates you start a programme.
-
Page 19: Hints And Tips
ENGLISH 9.9 The Auto Off function 9.10 End of the programme This function saves energy by switching When the programme is complete, the the appliance off when it is not operating. display shows 0:00. The function comes into operation The Auto Off function switches the automatically: appliance off automatically. -
Page 20: Care And Cleaning
10.5 Loading the baskets • Make sure that the water softener level is correct. If the level is too high, • Always use the whole space of the the increased quantity of salt in the baskets. water might result in rust on cutlery. - Page 21 ENGLISH 11.1 Machine Care 11.3 Removal of foreign objects Machine Care is a programme designed to clean the appliance interior with Check the filters and the sump after each optimal results. It removes limescale and use of the dishwasher. Foreign objects grease buildup.
- Page 22 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).
- Page 23 ENGLISH 2. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil 3.
-
Page 24: Troubleshooting
11.8 Cleaning the ceiling 2. Move the upper basket to the lowest level to reach the spray arm more spray arm easily. 3. To detach the spray arm (C) from the We recommend to clean the ceiling spray delivery tube (A), turn the mounting... - Page 25 ENGLISH Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 26 Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
- Page 27 ENGLISH Once you have checked the appliance, The PNC can be found on the rating deactivate and activate the appliance. If plate on the appliance door. You can the problem occurs again, contact an also check the PNC on the control panel. Authorised Service Centre.
- Page 28 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause.
-
Page 29: Technical Information
ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 560 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 - 60 Water supply pressure... - Page 32 www.aeg.com/shop...