Related Manuals for Zenith FFH-192A
Summary of Contents for Zenith FFH-192A
- Page 1 Installation and Operating Guide Machine Number | F-192 (Main Unit : FFH-192A, Speakers : FE-192E) | Hi-Fi MICRO CD COMPONENT...
-
Page 2: Precautions
Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclo-... -
Page 3: Table Of Contents
Connections ......8 Speaker System Connection ... . 8 Antenna (Aerial) Connections. -
Page 4: Important Safety Instructions
Important Safety Instructions 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use Instructions should be retained for future reference. 3. Heed all Warnings. - All warnings of the product and in the operating instructions should be adhered to. -
Page 5: Before Use
Before Use Safety Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To keep the surface clean Do not use volatile liquids, such as insecticide spray, near the unit. -
Page 6: Front Panel/ Rear Panel
Front Panel/ Rear Panel DISPLAY PRESET (-) button COUNTER RESET button RECORD/ RECORD PAUSE ( TUNER/ CD/ TAPE/ AUX indicators POWER ( STANDBY/ON) button VOLUME (-)/(+) knob CD SYNC. button PROG./ MEMORY button 10. HEADPHONE SOCKET ( ): 3.5mm 11. SURROUND button 12. -
Page 7: Remote Control
Remote Control Display Window XDSS TIMER MUTE MUTE indicator CD PLAY/ PAUSE indicator XDSS (Extra Dynamic Sound System) indicator TIMER indicator CD SYNCHRO RECORDING indicator SLEEP indicator PROGRAM indicator XDSS button POWER button TUNER/ BAND button AUX button PRESET ( ) button CD FUNCTION buttons •... -
Page 8: Connections
Connections Speaker System Connection Connect the speakers using the supplied speaker cords by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.). Right speaker Notes •... -
Page 9: Setting The Clock
Setting the CLOCK Press CLOCK. (If the clock requires setting, press and hold CLOCK for more than 2 seconds.) - The hours begin to flash. Select a 24 hour cycle or 12 hour cycle by pressing PRESET (-)/(+). (12HR) (24HR) Press SET to confirm the selected hour cycle. -
Page 10: Timer Function
Timer Function With the TIMER function you can have the radio reception and recording, CD play, tape play or auxiliary source play and recording turned on and off at the time desired. Press CLOCK to check the current time. Press “TIMER” to enter the timer setting mode. (If you want to correct the previous memorized TIMER setting, press and hold the “TIMER”... -
Page 11: Audio Adjustment
Audio Adjustment Volume Adjustment • Turn VOLUME (-)/(+) knob clockwise to increase the sound level, or counterclockwise to decrease it. • Press VOLUME CONTROL ( ) to increase the sound level, or press the VOLUME CONTROL ( to decrease it on the remote control. Sound Quality Adjustment •... -
Page 12: Presetting The Radio Stations
Presetting the radio stations You can preset 30 stations for FM and AM. Before tuning, make sure that you have turned down the volume to the minimum. Press FUNCTION repeatedly to appear TUNER indicator (or TUNER/BAND on the remote control). Press BAND to select the FM or AM you want in the display window. -
Page 13: Tape Playback
Tape Playback You can use only normal tape. Basic Playback Press FUNCTION repeatedly to appear TAPE indicator. (“NO TAPE” appears in the display window.) Open cassette deck by pushing PUSH EJECT position. Insert a cassette with the tape side to the bot- tom and then close deck. -
Page 14: Cd Playback
CD Playback Basic Playback Press FUNCTION repeatedly to appear CD indicator. If no disc is loaded then “NO DISC” is displayed. Press CD OPEN( ) and place the disc into the disc tray. Note To load an 8cm(3 inch) disc, put it onto the inner circle of the tray. -
Page 15: Troubleshooting
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. • The power cord is disconnected. • The audio cables are not No sound. connected securely. • The power of the external source equipment is switched off. -
Page 16: Specification
Rated Input Power Max. Input Power Net Dimensions (WxHxD) Net Weight (1EA) ❋ Designs and specifications are subject to change without notice. P/NO :3828R-A061B FFH-192A Refer to the back panel of the unit. 3.50kg 40 - 18000 Hz 60 dB 60 dB 87.5 - 108.0 MHz...