Table of Contents
Advertisement
Editing onto Another Tape
You can create your own video program by editing with any other H 8 mm,
Mi@
Hi8, VHS VHS,
SiVMS S-VHS, iVHSH VHSC, SVHSH S-VHSC, or H3 Betamax VCR that has video/audio inputs.
Before Editing
Connect the camcorder to the VCR using the supplied A/V connecting cable (p. 36).
Set the input selector on the VCR to LINE, if available.
(1) Set the POWER switch to VTR.
(
2
)
Set EDIT to ON in the menu system (p. 35).
Starting Editing
Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur.
(D Insert a blank tape (or a tape you want to record over) into the VCR and insert your recorded tape
into the camcorder.
(
2
)
Play back the recorded tape on the camcorder until you locate the point where you want to start
editing, then press II to put the camcorder in playback pause mode.
(
3
)
On the VCR, locate the recording start point and put the VCR in recording pause mode.
(
4
)
Press II on the camcorder and VCR simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing
Press □ STOP on both the camcorder and VCR.
Use of the EDITSEARCH button
You can play back the tape in the normal/reverse direction by holding down EDITSEARCH during
playback pause mode.
You can also play back still pictures successively at specific intervals by pressing EDITSEARCH
intermittently.
37
Advertisement
Table of Contents
