Triggering Spl Playback Using Gpi Signals - Sony SRX-R510 Operating Instructions Manual

2 Adjust the time as required.
3 Tap [Select Interval SPL] and select the SPL to
play during the interval period (Interval SPL).
4 Specify the interval period.
5 Using the control buttons, play back the CPL to
confirm intermission operation.
6 Tap [Apply].
The intermission will be set.
Note
Only one intermission can be set per SPL.
Triggering SPL Playback Using GPI
Signals
You can use a GPI signal as a trigger to start playing back
an SPL.
1
Tap [GPI Triggered] in the [SPL] tab.
The "GPI Triggered" screen will be displayed.
2
Select the GPI signal, and then tap [Edit].
The "Edit GPI-triggered SPL" screen will be
displayed.
3
Specify the duration for which playback is enabled.
2
1 Select the SPL for which to start playback.
2 Determine the duration for which the playback
will be enabled, and change the start and end
dates.
3 Tap [Apply].
Note
Tap [Details] to display detailed information on the
selected SPL.
29
3
1