Operation - Bosch rexroth A36VM Instruction Manual

42/54 A36VM | Operation
Bosch Rexroth AG, RE 91650-01-B/2021-07-19

9 Operation

Overloading of the axial piston motor!
Risk of injury or property damage!
When using the axial piston motor in winch drives it may, when extremely
overloaded (e.g., if the maximum permissible rotational speeds are exceeded
during weighing of the anchor while the ship is in motion), cause the rotary group
to be damaged and, in the worst case, the axial piston motor may burst.
▶ Ensure that the technical limit values are not exceeded in any operating
conditions.
▶ Check whether any additional measures are needed for your machine/system
(up to an encapsulation) in order to avoid any hazard to persons. If necessary,
make sure that these are properly implemented.
▶ For safety reasons, axial piston variable motors with beginning of control at
V
(e.g. HA) are not permissible for winch drives (e.g. anchor winches).
g min
This product is a component which requires no settings or changes during operation.
For this reason, this chapter of the manual does not contain any information on
adjustment options. Use the product only within the performance range specified
in the technical data. The machine/system manufacturer is responsible for proper
project planning of the hydraulic system and its control.
WARNING