KitchenAid KHBBV83 Manual page 9

CARE AND CLEANING
IMPORTANT: Allow the appliance to cool completely before putting on or taking off
parts, and before cleaning the appliance. Make sure that the Variable Speed Controller
is not pressed before attaching or removing parts or accessories.
1
Remove the Blending Arm, Pan Guard, or
Whisk accessory before cleaning.
3
Wipe the Motor Body with a damp cloth.
Mild dish soap may be used, but do not
use abrasive cleansers.
For detailed information on the Cordless Hand Blender:
Visit www.kitchenaid.com/quickstart
and tips on how to use and clean your Cordless Hand Blender.
TROUBLESHOOTING GUIDE
Problem
If the Cordless Hand Blender fails
to start:
If the Cordless Hand Blender is
not getting charged:
If the Cordless Hand Blender
stops while blending:
If the problem cannot be
corrected:
2
Dishwasher safe parts - top rack only:
Whisk, Pan Guard, Chopper Bowl, Chopper
Blade, Blender Pitcher, Blender Jar,
Blending Arm and Lid.
Wash Blender Arm, Chopper Attachment
and Whisk Adapter in hot, soapy water.
for additional instructions with videos, inspiring recipes,
Check if the Cordless Hand Blender is charged.
Charge the battery when the Battery status indicator is red
or when the Battery is completed drained.
If you have a circuit breaker box, check to make sure that
the circuit is closed.
When overloaded or jammed, it will automatically shut off
to prevent motor damage. Divide contents into smaller
batches. For certain recipes, adding liquid in the Jar may
also reduce the load.
See the "Warranty and Service" sections.
Do not return the Cordless Hand Blender to the retailer –
retailers do not provide service.
4 Cu p
3 1/2 Cu p
3 Cu p
2 1/2 Cu p
2 Cu p
1 1/2 Cu p
1 Cu p
p
1/2 Cu
Solution
9