Advertisement
es
PS-LX510
LOCATION AND FUNCTION OF CONTROLS
The photo shows the assembled turntable.
Each number in the text is keyed to that of the photo.
@ Auto-record-size selection holes and lamp
Qe Center spindle
@ Rubber matspeed which indicates some trouble.
© POWER switch
Press to turn on the turntable. To turn the turntable off, press it
again.
@ QUARTZ LOCK indicator
The indicator illuminates in green when the turntable rotations is
locked
to the nominal
speed by the quartz lock control system.
The indicator goes out when the turntable rotations is out of the
nominal speed which indicates some trouble.
@ SPEED selector and indicators
Selects the record speed. When the POWER
switch is turned on,
the speed is always 331/3 rpm and the indicator on the right illumi-
nates. When the selector is pressed. 45 rpm is selected and the indi-
cator on the left illuminates.
@ REPEAT button and indicator
Press this button to repeat play. The indicator illuminates and re-
peat play continues
until this button
is pressed to stop it. If the
START/STOP
button
is pressed during repeat play, the tonearm
returns
to the tonearm
resting position and the turntable stops
rotating.
8 ARM
LIFTER button
This button lifts and lowers the tonearm.
When the tonearm
is on the tonearm resting position, it cannot be
lifted up with this button.
(9) ARM TRANSPORT
buttons
To move
the tonearm
inwards,
press the <q button.
To
move
it
outwards
press the ® button. The tonearm
is raised automatically
and continues to move while the button is depressed. The tonearm
will stop when the button is released. For fine adjustment of the
tonearm
drop-point
over a record, press and immediately
release
the appropriate
button.
This button
is useful for beginning a re-
cord partway through, or for skipping to another selection.
@ START/STOP button and indicator
Press this button to start the record playing, and the indicator it-
luminates. To stop during play, press it again.
@ Cartridge
@® Cartridge tocking screw
® Tracking force adjustment lever
@® Synchro remote control jack (rear)
Synchronized
recording from disc to tape is possible on specified
Sony cassette decks by using the optional
RM-65 synchro remote
control unit.
—4—
Advertisement
