Antenna/Cable Connection - Sony TRINITRON KV-2786R Owner's Record

ANTENNA/CABLE CONNECTION
To connect a VHF antenna, UHF antenna, VHF/
UHF combination antenna *or CATV cable
1 Check the cable type and attach the appropriate
connector to the antenna end.
Commercially available
F-type connector
Supplied antenna connector
2 Plug the connector into the VHF/UHF antenna terminal
on the rear of the unit.
fy o—
VHF/UHF
(i
* Most combination antennas are equipped with a signal splitter.
Remove the splitter and attach the appropriate connector.
To connect both VHF and UHF antennas
1 Attach an F-type connector to the VHF antenna end.
2 Plug an optional EAC-66 U/V mixer into the VHF/UHF
antenna terminal on the rear of the unit. Connect the
antenna ends to the U/V mixer.
VHF/UHF