Feature Reference
1: Harmonic Enhancer
Carrier Parameters
Modulator Parameters
•
The Harmonic Enhancer has both a "Carrier" and "Modulator" block, as
shown in the block diagram below. Each has its own parameters and therefore
two separate parameter pages are provided. Press the ¡ button ("Crr") to
select the carrier parameter page or ™ ("Mod") to select the modulator
parameter page.
and tap sound.
The • button ("Ctrl") can be used to go directly to the harmonic enhancer
•
controller page (
TROLLER directory. You can then return to the modifier harmonic enhancer
page by pressing • ("Para") again.
•
An inverse "K"(˚) next to a value means that key scaling can be applied to
that parameter. Position the cursor at the appropriate parameter and then press
the ¶ button ("KSC") to go directly to the key scaling page for that param-
eter. You can return to the harmonic enhancer parameter page by pressing the
] button.
Edit Mode
Modulator
Modulator
Source.
Carrier
Carrier
Source.
Driver,
pipe/string,
Page 78), also available from the ELEMENT CON-
Wet/Dry
Out
Balance
(to Dynamic Filter.)