Table of Contents
Advertisement
Getting Started
Power-on Procedure
Always follow proper procedure when powering-up a sound system to minimize the
possibility of damage to the equipment (and your ears!).
1.
Make sure your sound system's main level/volume control(s) and the VL1-m
volume control are turned all the way down prior to turning power on.
2.
Turn on the VL1-m.
3.
Turn on your MIDI controller.
4.
Turn on the sound system.
5.
Raise the sound system volume to a reasonable level.
6.
Gradually raise the VL1-m VOLUME control while playing the MIDI controller to
set the desired listening level.
NOTES
control change data corresponding to their control status when the power switch
is turned ON or OFF. The VL1-m is programmed to receive this data and respond
accordingly, so it is preferable to turn the VL1-m ON before turning the
controlling device ON.
Setting Up
Most keyboards and other MIDI controllers automatically transmit MIDI
25
Advertisement
Table of Contents
