Voltage Selection; Ac Power Supply Cord And Ac Plug Adaptor - Sharp CD-BK133W Service Manual

Hide thumbs Also See for CD-BK133W:

Operation manual (78 pages)

Operation manual (27 pages)

Table of Contents

CD-BK133W

Troubleshooting

If trouble occurs

When this product is subjected to strong external interference (mechanical shock,

excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

Set the unit to the stand-by mode and turn the power on again.

If the unit is not restored in the previous operation, unplug and plug in the unit,

and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by resetting it.

Clearing all the memory (reset)

Press the ON/STAND-BY button to enter the power stand-by mode.

Whilst pressing down the

ton, press the ON/STAND-BY button until "CLEAR AL" appears.

Caution:

This operation will erase all data stored in memory including clock, timer settings,

tuner preset, and CD programme.

Before transporting the unit

Press the ON/STAND-BY button to turn the power on.

Press the CD button.

Press the

OPEN/CLOSE button to open the disc tray.

Remove all CDs from the unit.

Press the

OPEN/CLOSE button to close the disc tray.

Make sure that "NO DISC" is displayed.

Press the ON/STAND-BY button to enter the stand-by mode, and then unplug

the AC power lead from the AC socket.

Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage

as follows.

Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230 V-240 V AC).

AC POWER SUPPLY CORD AND AC PLUG ADAPTOR

QACCB0012AW00

QACCE0007AW00

92L24801800222

button and the EQUALIZER/X-BASS/DEMO but-