Removing The Delay At The Beginning Of The Reverberation - Yamaha S Rev1 Supplementary Manual

Removing the Delay at the Beginning of the Reverberation

Removing the Delay at the Beginning of the
Reverberation
Your impulse-response data may contain a spatial delay at the beginning due to the time
it takes the pulse to reach the microphone from the speaker. In some cases this may be
a hindrance and can be deleted by using the IREdit Cut function.
The following image shows a spatial delay region selected for cutting.
The following image shows the data after the spatial delay out has been cut.
13
SREV1 Sampling Guide