Page 5
3. Disassembly and Reassemble 3. Disassembly and Reassembly Disconnect the LED TV from the power source before disassembly. Follow these directions carefully; never use metal instruments to pry apart the cabinet. Recommend Torque : 22.0 ~ 26.5lbf CAUTION • A strength of Torque can be changed depending on the situation. 3-1.
Page 6
3. Disassembly and Reassemble Description Picture Description Remove the screws for the 'Rear Cover'. Then carefully remove the 'Rear Cover'. Screws C/R+PANEL : 16EA 6001-002755 x 17EA C/R+MAIN : 1EA C/R+SMPS : 1EA TORQUE : 22.0 ~ 26.5lbf TORQUE : 22.0~26.5 lbf 6003-001782 x 1EA TORQUE : 22.0 ~ 26.5lbf Screw Qty in each model...
Page 7
3. Disassembly and Reassemble Description Picture Description Remove the cables from the 'TV Board'. Use both hands to hold the 'Main Board' and gently lift up 2 point marked. Slide the board to the Left side to release the board. Then carefully remove the 'TV Board'.
Page 8
3. Disassembly and Reassemble Description Picture Description Remove the BT/WIFI and IR unit. Remove the JOG unit. Lastly, remove the speakers on both side.
Page 9
3. Disassembly and Reassemble Description Picture Description * Panel - Rear Side Always remember to disconnect the Poewr Cord before assembling or disassembling the LED TV. Always take precautions and follow the steps properly. Remember to take a picture before disassenbling.
Page 10
ANNEX. Exploded View & Part List ANNEX. Exploded View & Part List [UE40KU6092UXXH FA01] 1-1. Exploded View 1-1-1. Parts List Code No. Description & Specification Q’ty SA/SNA Remark BN95-03221A PRODUCT LCD DP; DP,BN95-02634A,SEH ONLY BN96-35007D ASSY SPEAKER P-FRONT; TV-SPK,JU6400,6ohm, BN94-10711A ASSY PCB POWER;...
Page 11
ANNEX. Exploded View & Part List 2-1. Electrical Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark UE40KU6092UXXH (FA01) S001A BN90-06669M ASSY STAND;UJ5000,40'' SG03 BN61-11465A GUIDE-STAND;J5100/5500 40",PC+GF20%,MOLD 0103-007285 RESIN PC;HF3200H,K21294,BK0007,V-2 SB04A...
Page 48
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
Page 49
1. Precautions 1-1-4. Product Safety Notices Some electrical and mechanical parts have special safetyrelated characteristics which are often not evident from visual inspection. The protection they give may not be obtained by replacing them with components rated for higher voltage, wattage, etc.
Page 50
1. Precautions 1-2. Servicing Precautions An electrolytic capacitor installed with the wrong polarity might explode. WARNING Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. CAUTION If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
Page 51
1. Precautions 1-3. Static Electricity Precautions Some semiconductor (solid state) devices can be easily damaged by static electricity. Such components are commonly called Electrostatically Sensitive Devices (ESD). Examples of typical ESD are integrated circuits and some field-effect transistors. The following techniques will reduce the incidence of component damage caused by static electricity. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground.
Page 52
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
Page 53
2. Product specifications 2. Product Specifications 2-1. Product information Model UE**KU6092U Front View * W : Width H : High D : Depth Detail View Design Front Color : Black / Stand Type : V-Shape with Stand 917.7 x 596.5 x 288.1 mm 40"...
Page 54
2. Product specifications 2-2. Detail Specification Item UE40KU6092UXXH General Information Product Series Country HUNGARY Platform(TV) SoC | Jazz-L Display Screen Size 40" Screen Size (cm) 101 cm Resolution 3,840 × 2,160 Quantum Dot Display Ultra Black Screen Curvature 10 bit Support Video Picture Engine UHD Up-Scaling...
Page 55
2. Product specifications Item UE40KU6092UXXH Smart TV Samsung SMART TV Apps Games Cloud Game Billing Yes(RO,BG,CZ,SK,LV,LT,EE) Automated Content Recognition (ACR) Web Browser Smart Interaction Voice Recognition Convergence TV to Mobile - Mirroring Mobile to TV - Mirroring, DLNA Samsung SMART View...
Page 56
2. Product specifications Item UE40KU6092UXXH Connectivity Anynet+ (HDMI-CEC) Design Design JU6000 Concept modified Bezel Type Slim Type Slim Front Color Black Light Effect (Deco) Stand Type V-Shape Swivel (Left/Right) Additional Feature Instant On Processor Quad-Core Voice guide(EU 17 countries)/ Enlarge/ Accessibility High contrast Digital Clean View...
Page 57
Contrast Enhancer Auto Motion Plus Film Mode Peak Illuminator Audio Dolby Digital Plus DTS Codec Sound Output (RMS) Speaker Type 2CH(Down Firing w/Bass Reflex) Woofer Wallmount Sound Mode Multiroom Link TV SoundConnect BT Headset Support Smart TV Samsung SMART TV Apps...
Page 58
Automated Content Recognition (ACR) Web Browser Smart Interaction Voice Recognition Convergence TV to Mobile - Mirroring Mobile to TV - Mirroring, DLNA Samsung SMART View Bluetooth Low Energy WiFi Direct IoT Service TV as Hub Support TV as Things Support IoT Client Application...
Page 59
2. Product specifications Item UE50KU6092UXXH Design Design JU6000 Concept modified Bezel Type Slim Type Slim Front Color Black Light Effect (Deco) Stand Type V-Shape Swivel (Left/Right) Additional Feature Instant On Processor Quad-Core Voice guide(EU 17 countries)/ Enlarge/ Accessibility High contrast Digital Clean View One Connect (Jack) Auto Channel Search...
Page 60
Contrast Enhancer Auto Motion Plus Film Mode Peak Illuminator Audio Dolby Digital Plus DTS Codec Sound Output (RMS) Speaker Type 2CH(Down Firing w/Bass Reflex) Woofer Wallmount Sound Mode Multiroom Link TV SoundConnect BT Headset Support Smart TV Samsung SMART TV Apps...
Page 61
Automated Content Recognition (ACR) Web Browser Smart Interaction Voice Recognition Convergence TV to Mobile - Mirroring Mobile to TV - Mirroring, DLNA Samsung SMART View Bluetooth Low Energy WiFi Direct IoT Service TV as Hub Support TV as Things Support IoT Client Application...
Page 62
2. Product specifications Item UE55KU6092UXXH Design Design JU6000 Concept modified Bezel Type Slim Type Slim Front Color Black Light Effect (Deco) Stand Type V-Shape Swivel (Left/Right) Additional Feature Instant On Processor Quad-Core Voice guide(EU 17 countries)/ Enlarge/ Accessibility High contrast Digital Clean View One Connect (Jack) Auto Channel Search...
Page 63
Auto Motion Plus Film Mode Peak Illuminator Audio Dolby Digital Plus DTS Codec Sound Output (RMS) Speaker Type 2CH(Down Firing w/Bass Reflex) Woofer Wallmount Sound Mode Multiroom Link TV SoundConnect BT Headset Support Smart TV Samsung SMART TV Apps 2-11...
Page 64
Automated Content Recognition (ACR) Web Browser Smart Interaction Voice Recognition Convergence TV to Mobile - Mirroring Mobile to TV - Mirroring, DLNA Samsung SMART View Bluetooth Low Energy WiFi Direct IoT Service TV as Hub Support TV as Things Support IoT Client Application...
Page 65
2. Product specifications Item UE65KU6092UXXH Design Design JU6000 Concept modified Bezel Type Slim Type Slim Front Color Black Light Effect (Deco) Stand Type V-Shape Swivel (Left/Right) Additional Feature Instant On Processor Quad-Core Voice guide(EU 17 countries)/ Enlarge/ Accessibility High contrast Digital Clean View One Connect (Jack) Auto Channel Search...
Page 66
2. Product specifications 2-3. NEW Key Features 2-3-1. 16" New UI Smart Hub APPS Service 2-14...
Page 67
2. Product specifications 2-4. Smart Control 2-4-1. Remote Control (Europe except Turkey) • This remote control has Braille points on the Power, Channel, Volume and Enter buttons and can be used by visually impaired persons. • The button names above may be differ from the actual names. (Power): Turns the TV on and off.
Page 68
2. Product specifications 2-4-2. Remote Control (Turkey) (Power): Press to turn the TV on or off. (Number pad): When pressed, a number strip appears on the bottom of the screen. Select numbers and then select Done to enter a numeric value. Use to change the channel, enter a PIN, enter a ZIP code, etc.
Page 70
2. Product specifications 2-5. HDMI Color 2-5-1. HDMI UHD Color • When you set the HDMI connection to On, the TV turns off and then on automatically. • The HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while the HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals.
Page 71
2. Product specifications 2-6. Supported Formats 2-6-1. Supported image formats and resolutions File Extension Type Resolution *.jpg JPEG 15360x8640 *.jpeg *.png 4096x4096 *.bmp 4096x4096 *.mpo 15360x8640 2-6-2. Supported music formats and codecs File Extension Type Codec Note *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a *.mpa MPEG4...
Page 72
2. Product specifications 2-6-3. Supported video codecs File Frame rate Bit rate Container Video Codecs Resolution Audio Codec Formats (fps) (Mbps) 4096 x 2160: 30 H.264 BP/MP/HP 3840 x 2160: 60 4096 x 2160 HEVC (H.265 - Main, Main10, Main4:2:2 10) Motion JPEG 3584 x 2160 *.avi...
Page 73
2. Product specifications 2-7. Accessories NOTE • The items’ colors and shapes may vary depending on the model. • Cables not included in the package contents can be purchased separately. • The part code for some accessories may differ depending on your region. Product Code.
Page 74
4. Troubleshooting 4. Troubleshooting 4-1. Previous Check Check list for initial operation Check the various cable connections first. Check to see if there is a burnt or damaged cable. Check to see if there is a disconnected or loose cable connection. Check to see if the cables are connected according to the connection diagram.
Page 75
4. Troubleshooting 4-2. How to Check Fault Symptom 4-2-1. Power TV POWER STANDBY TV in Standby √ Standby LED Indicator If Not Lit: √ AC 120Vac Line If missing: √ 120Vac Source and Power Cord If OK: √ Resistance on SMPS Fuse after first removing AC power cord.
Page 76
4. Troubleshooting FUNCTION/IR Control TV in Standby √ LED Status LED is OFF √ LED 1.7Vdc (pin 8)and VCC for 3.3Vdc • If missing suspect Function Assy/Cable/Main board. LED is ON √ Switch Operation activates on screen display. <On Screen Selections with Function Control> If missing: Check the STBY voltage from SMPS to Main Board.
Page 77
4. Troubleshooting SMPS POWER Power TV On. PS_ON . 2Vdc (when off) changes to 3.3Vdc (on) √ May already be On if IoT USB is loaded or TV Smart Things Hub mode is active. if voltage error or no change. √...
Page 78
4. Troubleshooting BACKLIGHTS Activate Backlights Test Disconnect Lead Cable from Main Board to Power Supply. (CN202) √ TV Screen for active backlight LEDs. If NO BACKLIGHTS √ Plus (+) & Minus (-) pin voltages on the Panel Connector. If no pin voltages replace SMPS. If voltages exist but no backlight: √...
Page 79
4. Troubleshooting 4-2-2. Video Customer Picture Test MAIN/TCON BOARD Main Section Pre- FRC (T-CON) Post FRC ( T-CON) Test Result Problem Check Signal Source and other Pass Pass Pass inputs to One Connect Fail Pass Pass Replace Main/T-CON Board Fail Fail Pass...
Page 80
4. Troubleshooting MAIN / T-CON Board Main Board Section Start Up Logo Customer Picture Test 1 Mute - 147 - Mute Video Operation : Generated on Main Section. If OK: √ Source & Input Cables. √ Other inputs. √ One Connect Cable/Box.
Page 81
4. Troubleshooting T-CON Section Mute - 369 - Mute NOTE May not be available for Larger models over 70 inches. Video Operation : Generated at T-CON Section. If OK: √ Main / T-CON Board (defective). If Noisy: √ Main / T-CON Board.
Page 83
4. Troubleshooting 4-2-3. Audio AUDIO Source • No TV Sound √ Menu → Audio → Speaker Settings set to TV Speaker • Noisy / Distorted TV Audio √ Customer Menu → Support → Sound Test • Sound Test FAILS : (Missing / Noisy Audio) √...
Page 84
4. Troubleshooting 4-2-4. Network <TV> <Router> <Internet> TV to Router "Failure" Check Router Network Status Internet Wired & Wireless MAC Address • in Customer Support Menu. √ No Wired MAC Address : Replace Main Board. √ No Wireless MAC Address : Module cabling &...
Page 85
Terms of Agreement are accepted. Samsung Apps • If it Fails: √ Reset Smart Hub. √ Samsung Apps load correctly. Apps Reset" in Factory Mode. √ Perform " √ Go to Smart Hub and complete Terms of Agreement and set up information.
Page 86
4. Troubleshooting For Netflix Operation/Connection Issues: • Check Certificate & Netflix ESN Status in Factory Mode. If Certificate and ESN exists, " CO", "NfO", change the 8.8.8.8 If Certificate is missing, " C/" replace the TV’s Main Board. If ESN number is missing: NF/ do not replace the Main Board.
Page 87
B+_5V SWL-R55 Wake up Sleep/OFF to ON 1 2 3 4 5 6 Go to Menu > Support > Contact Samsung Contact Samsung < - Wired MAC Address : xx:xx:xx:xx:xx:xx • Wired MAC Address (Missing or Error : Replace Main Board.
Page 89
To enter ‘Service Mode’ Press the remote-control keys in this sequence : Factory Remote Power TV ON. Select TV Source. Info → Factory. MENU for return. Samsung IR Remote (Limited Operation) TV Power Standby. Press as follows. • Remote Button : Power OFF INFO MENU...
Page 90
4. Troubleshooting First Screen Appearing in Factory Mode (SAMPLE) Testing Items √ √ Main SW Version T-JZL6DEUC-XXXX.XX T-JZMDEUS-XXXX √ SW Version tztv-X.X.-main2016-jazz-m__XXXXXXXX.X BT Version : BLUETOOTH-VER-XXXX E-Manual:---- CAMERA:**** Blaster Version : Not support E-POP Version : JAZZLUHD-XXXX.X EDID SUCCESS HDCP SUCCESS CALIB : AV/COMP/PC/HDMI/ Option : NONE_16,NONE,6000,NONE DTCP Not Support...
Page 91
4. Troubleshooting 4-3-2. Detail Factory Option NOTE If you replace the main board with new one, please change the factory option as well. The options you must change are "Type". UE40KU6092UXXH Multi Bom FA01 FB02 FC03 Panel Type 40A6AU0VK 40A6AU2VK 40A6AU0VK Vendor...
Page 94
4. Troubleshooting UE65KU6092UXXH Multi Bom DA01 Panel Type 65D6AU0VK Vendor PANEL Code BN95-02641A Specification CY-GK065HGNV1V/H Vendor SOLUM SMPS Code BN44-00808D Specification L65S6N_FSM W,AC/DC Chassis Ass’y BN91-17280D MAIN PBA Ass’y BN94-10803C Local set BOM Model Front Color SW Model 6092 U-F-KU60 UKU6000 4-21...
Page 95
4. Troubleshooting 4-3-3. Factory Data Option Factory Menu Name Data Range Factory Reset Type 40" 40A6AU0VK, 40A6AU2VK, 40A6AU3VK 50" 50D6AU0VK, 50D6AU2VK, 50D6AU4VK 55" 55L6AU0VK, 55B6AU0VK 65" 65D6AU0VK Local Set SW Model UKU6000 BOM Model 6092 TUNER S_T2C Ch Table NONE MRT Option Control...
Page 96
4. Troubleshooting Factory Menu Name Data Range TTX Group UserOSD Visual Test Diable OPTION_SWU RF Remocon Support CDD mode … DPMS Support T-CON Device JazzFT RM Server Type Operating LMF LEAVE THRESHOLD LMF TRIM THRESHOLD LMF TERM THRESHOLD EOS Click BP PMS Reset FAnet Thread CI CPLD Version...
Page 97
4. Troubleshooting Factory Menu Name Data Range Menu OSD Operation Music Mode External Source Eco Solution Cloning Shop Option Exhibition Mode Peak Mode Metadata Shopmode Picture Reset Asia Option Unbalance AF Level adjust TX Power Level Mono Last Memory H Shaking SOUND High Devi *If the broadcast signal is not good, TV will...
Page 98
4. Troubleshooting Factory Menu Name Data Range PEQ Inx PEQ Test Ready Speaker EQ Bottom Checksum NONE Wall Filter Type SRS Tuning Parm SPDIF PCM Gain AudioDock BT Delay 3D_Glass BT delay Mic Scale India Sound Speaker Delay Normal NTV CU Delay NORMAL Lipsync Inx Lipsync Checksum...
Page 99
4. Troubleshooting Factory Menu Name Data Range LVDS SSC Value AP Vx1 SSC ON/OFF AP Vx1 Value N Vx1 SSC ON/OFF N Vx1 Value FRC Vx1 SSC ON/OFF FRC Vx1 SSC Period FRC Vx1 SSC Modulation FRC LVDS ON/OFF FRC LVDS SSC MFR FRC LVDS SSC MRR FRC DDR SSC ON/OFF FRC DDR SSC Period...
Page 100
4. Troubleshooting Factory Menu Name Data Range FRC VX1 TX Pre_emphasis setting Netflix OSD Threshold TCON TCON_TEMP READ TEMP LAST 6000 DCC VERSION TCON Demura Bypass TCON FDisplay Panel Code 1 Panel Code 2 Panel Revision Panel Menu Week Panel S/N 1 Panel S/N 2 Panel S/N 3 Panel S/N 4...
Page 101
4. Troubleshooting Factory Menu Name Data Range CES Convergence Option CES ATSC 3_0 CES OOBE MVPD SUPPORT BT DUT BT Throughput Failure Reproduce Module 21_9 L-DETECT STABLE TIME L-DETECT UNSTABLE TIME L-DETECT CAPTION THRESHOLD L-DETECT RAGION THRESHOLD L-DETECT B-LEVEL THRESHOLD L-DETECT USB SUPPORT DB Download MRT Option Dump...
Page 102
4. Troubleshooting Factory Menu Name Data Range CLK TERM DURATION 300ms HDMI FLT CNT SIG HDMI FLT CND SIG2 HDMI FLT CNT LOS UNSTABLE BAN CNT 1250ms HDMI ROBIN HDMI Callback HDMI CTS Thld HDMI CTS Cnt1 HDMI EQ HDMI Write Type HDMI Switch DVI SET TIME H Write...
Page 103
4. Troubleshooting Factory Menu Name Data Range TS Clock delay CPU2 Test Pattern Scaler Pattern US Post Pattern FRC Pre Pattern FRC Post Pattern SOC TCON Pattern SOC TCON Pattern Level FRC OSD Pre Pattern FRC OSD Post Pattern FRC2 Pre Pattern FRC2 Post Pattern SOC TCON2 Pattern SOC TCON2 Pattern Level...
Page 104
4. Troubleshooting Factory Menu Name Data Range IR Blaster delay time NTV CU UPDATE UD LDC PROFILE UPGRADE Pic Data USB Update Audio Data USB Update Eco Data USB Update CI CPLD Upgrade SC ADK Upgrade Other Setting Delete S/N IPERF Stopped Expert...
Page 105
4. Troubleshooting Factory Menu Name Data Range Comp Calibration PC Calibration HDMI Calibration ADC Result 1st_Y_GH 1st_Y_GL 1st_Cb_BH 1st_Cb_BL 1st_Cr_RH 1st_Cr_RL 2nd_R_L 2nd_G_L 2nd_B_L 2nd_R_H 2nd_G_H 2nd_B_H White Balance R-Offset G-Offset B-Offset R-Gain G-Gain B-Gain WB-W2_R_Offset WB_W2_B_Offset WB_W2_R_Gain WB_W2_B_Gain WB_N_R_Offset WB_N_B_Offset WB_N_R_Gain WB_N_B_Gain...
Page 106
4. Troubleshooting Factory Menu Name Data Range G2_Gain B2_Gain R3_Gain G3_Gain B3_Gain R4_Gain G4_Gain B4_Gain R5_Gain G5_Gain B5_Gain R6_Gain G6_Gain B6_Gain R7_Gain G7_Gain B7_Gain R8_Gain G8_Gain B8_Gain R9_Gain G9_Gain B9_Gain R10_Gain G10_Gain B10_Gain SPI White Balance SPI White Balance On/Off SPI R-Offset SPI G-Offset SPI B-Offset...
Page 107
4. Troubleshooting Factory Menu Name Data Range SPI N Boffset SPI W2 Rgain SPI W2 Bgain SPI W2 Roffset SPI W2 Boffset SPI MGA WB Data to SPI Advanced 4-34...
Page 108
4. Troubleshooting 4-4. White Balance 4-4-1. Calibration Into the Factory Mode. Select ADC/WB menu. Select menu. AV Calibration Option Comp Calibration Control PC Calibration Debug HDMI Calibration ADC/WB Advanced 4-4-2. Service Adjustment You must perform Calibration in the Lattice Pattern before adjusting the White Balance. Color Calibration ...
Page 109
4. Troubleshooting Method of Color Calibration (AV) Apply the NTSC Lattice (N0. 3) pattern signal to the AV IN 1 port. Press the Source key to switch to “AV1” mode. Enter Service mode. Select the “ADC” menu. Select the “AV Calibration” menu. In “AV Calibration Off”...
Page 110
4. Troubleshooting 4-4-3. Adjustment Into the Factory Mode. Select ADC/WB menu. White Balance Select menu. Option Control Debug (Low Light) (Hight Light) Sub Brightness Sub Contrast White Balance ADC/WB R offset R gain Advanced G offset G gain B offset B gain 4-37...
Page 111
Updating from the Internet requires an active Internet connection. • To update using a USB flash drive, download the update package from Samsung.com to your computer. Then, save the update package in the USB device's top-level folder. Otherwise, the TV will not be able to locate the update package.