Description & Screws
6
Gently lift up the Rear Cover from the bottom
corners to release all mounting clips as
indicated by Red Rectangles.
If tabs break, Using Back coever as it is.
•
Panel Back Side View
7
Remove the Electric tapes, Remove them.
NOTE
•
When assembling the TV, the electric tapes
must be applied on the same locations.
Please remember to take a picture of
where the tapes were first applied.
•
When assembling the Boards, please make
sure All Board Mounting Clips are securly
inserted.
3. Disassembly and Reassemble
Picture Description
Top
: 10 point Locking
Label
: 1 Point Locking
Bottom
: 6 point Locking
<Locking tabs locations>
3-3