Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Hagan Manuals
  4. Sports & Outdoors
  5. ULTRA BINDING 110 GRAMS
  6. Manual

Hagan ULTRA BINDING 110 GRAMS Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
(ENG) USER'S AND MAINTENANCE
GUIDEBOOK
ULTRA BINDING
110 GRAMS
WARNING! DANGER!
The removal of the "SEAL OF LIABILITY '", firmly affixed by the manufacturer
HAGAN SKI Ges.m.b.h.
MUST BE PERFORMED
exclusively by the original user himself.
The removal of the "SEAL OF LIABILITY '" is the proof of a full, direct, careful
and aware acknowledgement of the entirety of the parts forming the "USER'S
AND MAINTENANCE GUIDE BOOK" which is inserted into the packaging of the
product itself, in particular the full acknowledgment of the entirety of the
disclosures contained into the warning boxes underlined by the words
"
WARNING! DANGER!"
regarding the risks raised by the product use, for the user itself and/or third
parties, and all the producer "LIABILITY LIMITATIONS" clauses.
100% MADE IN ITALY
HAGAN SKI Ges.m.b.H. | Andiesen 11, A-4774, St. Marienkirchen, Austrian | +43 7711 33133 | info@hagan-ski.com | www.hagan-ski.com REV 1 | 31-08-2020

Advertisement

loading

Related Manuals for Hagan ULTRA BINDING 110 GRAMS

Summary of Contents for Hagan ULTRA BINDING 110 GRAMS

  • Page 1 “LIABILITY LIMITATIONS” clauses. 100% MADE IN ITALY HAGAN SKI Ges.m.b.H. | Andiesen 11, A-4774, St. Marienkirchen, Austrian | +43 7711 33133 | info@hagan-ski.com | www.hagan-ski.com REV 1 | 31-08-2020...
  • Page 2 (EN) ENGLISH Thank you for choosing HAGAN BINDINGS® ! The HAGAN® ski touring bindings are shaped following the most sophisticated design principles and highest level mechanic techniques. HAGAN ® bindings are completely designed, developed and manufactured in Fiorano Modenese (Modena, Italy).
  • Page 3 WARNING! DANGER HAGAN® binding model “ HAGAN ULTRA ” has been designed, developed and produced with the only purpose of use in skimountaineering competitions. The HAGAN binding model “ HAGAN ULTRA “ DOES NOT COMPLY WITH ANY DIN/ISO SAFETY STANDARD ( in particular it...
  • Page 4 The installation of any HAGAN® binding must be performed by an AUTHORIZED DEALER, equipped with all the tools needed to realize a state of the art installation, including the original HAGAN® drilling jig ( COD. M05 or following ) dedicated to the product that must be installed on skis;...
  • Page 5 • In case of experiencing a release of the boot while the binding toe part is set on the “UPHILL MODE” as consequence of a strange happening/particularly high stress ( fall, avalanche, slippage etc. ) immediately stop the use of the product and contact HAGAN® at info@hagan-ski.com for further indications.
  • Page 6 Slightly pull the front lever towards you up to the stabilization of the front lever on the blocked mode as shown at PICTURE E: in this way the toe release system will be disabled. PICTURE C PICTURE D PICTURE E WWW.HAGAN-SKI.COM...
  • Page 7 Move the boot tip towards the binding toe part, placing the 2 seats of the tech insert of the boot in correspondence of the hooking pins of the binding. From this position, vertically press the boot tip activating the binding closure over the boot ( PICTURE H/I ). PICTURE G PICTURE F PICTURE H WWW.HAGAN-SKI.COM...
  • Page 8 PICTURE I. PICTURE I • Press the boot heel towards the heel hooking pins, up to the full hooking as shown at PICTURE L. PICTURE L WWW.HAGAN-SKI.COM...
  • Page 9 • Lift and rotate the foot tip moving the boot forward in order to get out from the heel part as shown at PICTURE O PICTURE M PICTURE N PICTURE O WWW.HAGAN-SKI.COM...
  • Page 10 5| HOW TO INSTALL A CRAMPONS SLOT ( COD. SRA ) WARNING: the crampon slot SRA is not included into the binding box; in case of need, it can be purchased through any HAGAN AUTHORIZED DEALER. • Check that the crampons slot seat is free from debris or dirt that may affect the correct positioning of the slot; otherwise, clean it.
  • Page 11 5.1 | HOW TO USE THE HAGAN CRAMPONS WARNING! DANGER! • The crampons must be used only in certain weather conditions; using crampons with wrong snow/ground conditions could damage the crampons or the binding and can cause risks of injury for the user and/or third parties.
  • Page 12 WARNING! DANGER! • We recommend the use of the SBC02 leash with all the HAGAN bindings produced after 2016; the use of not original leashes may cause damages to the binding itself, or represent a danger for the user in case of malfunctions due to uncompatibility with the binding.

  • Page 13: Care, Maintenance And Storage

    To preserve optimal performance of the product, including the release systems efficiency, it is highly recommended to periodically ( EACH 3 MONTHS OF USE ) lubricate the joints or rotation points with the HAGAN® ORIGINAL GREASE ( CODE SG01 ) , that can be purchased in any of our AUTHORIZED DEALERS. Grease and maintenance user’s guides are available on www.hagan-ski.com, at the respective product webpage.
  • Page 14 For a warranty activation – which may involve a choice of HAGAN to substitute or repair the product – the costumer must reach one of the HAGAN AUTHORIZED DEALERS, and in case that all the warranty conditions will be satisfied, a warranty operation will be activated.
  • Page 15 HAGAN SKI Ges.m.b.h. communicates that the pictures and descriptions included in this catalogue are indicative; HAGAN SKI Ges.m.b.h. has the right to modify, up-date or delete each product or process described in this user instructions manual.
  • Page 16 Check out our ski collection at www.hagan-ski.com WWW.HAGAN-SKI.COM...