Epson WorkForce Pro WF-M4119 Quick Start Manual

WF-M4119/WF-M4619
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
The illustrations show the WF-M4619, but the steps are the same
for the WF-M4119, unless otherwise specified.
This printer is designed for use with Epson
Note:
third-party cartridges or ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
To reduce the risk of fire, use only a No. 26 AWG or larger
Caution:
telecommunication line cord.
1
Unpack
WF-M4119
Do not open the ink cartridge package until you are ready to
Note:
install the ink. The cartridge is vacuum packed to maintain reliability.
1
Remove all protective materials from the product.
cartridges only, not
®
When using telephone equipment, you
WF-M4619
2
WF-M4119: Lift up the printer cover.
WF-M4619: Lift up the scanner unit until it locks into
place.
Remove all protective materials from inside the
product.
WF-M4119
3
Lower the scanner unit or printer cover.
2
Turn on and configure
1
Connect the power cord to the back of the product
and to an electrical outlet.
WF-M4119
WF-M4619
Do not connect to your computer yet.
Caution:
2
Raise the control panel and turn on the product.
If an error code appears, turn off the product and
Note:
check that no protective materials have been left inside the
product.
WF-M4619