Utility Mode
The DTXTREME system settings are made in this
mode, and includes parameters that are common
to all modes such as MIDI, effects and Memory
Card settings.
Entering Utility Mode
Press the UTILITY button.
UTILITY
Edit Pages and Basic
Operations in Utility Mode
The Utility mode parameters are grouped into the
following seven categories. Each category has its
own parameters pages.
Category display
1.
Use the Page
and
Page containing the parameter you wish to
set. The Page
and
any page regardless of category.
2.
Use the leftmost Data Control knob and jump
to the first page of each category. The first
page of each category are: [UT 1], [UT 3], [UT
5], [UT 9], [UT 13], [UT 17] and [UT 19].
3.
Use the Data Control knob below each
parameter to change the parameter's value. In
Utility mode, the values are stored as you
enter them (no Store operation required).
Parameter
buttons to select the
buttons let you select
n By turning the knobs while holding down the SHIFT
button, the values will change in larger increments.
3Band Master EQ settings
Tone generator settings.
--[UT 3] TG 1
--[UT 4] TG 2
--SYSTEM (page 72)
System settings
--[UT 7] SYSTEM 3
--MIDI (page 75)
MIDI settings
--CLICK (page 77)
Click sound and mode settings
Sequencer settings
--[UT 17] SEQ 1
--[UT 18] SEQ 2
--CARD (page 80)
Memory Card-related operations
--[UT 19] CARD LOAD
--[UT 20] CARD SAVE
--[UT 21] CARD DELETE
--[UT 22] CARD RENAME
--[UT 23] CARD FORMAT
70