Advertisement
Available languages
Available languages
20.
21.
22.
23.
24.
25.
26.
VTR 75 © termination switch
Set this switch to 75 Q to terminate
the input signals of the VTR connected
to the 8-pin connector
@ or to the
VTR
AUDIO
and VIDEO input/out-
put connectors @ and @. Set it to
OPEN
to make the input signals of the
VTR connected to the 8-pin connector
® available at the VTR AUDIO and
VIDEO
input/output connectors
@
and @ .
VTR AUDIO input/output DIN (5-pin)
socket
:
VTR
VIDEO
input/output BNC con-
~nector
Connect the audio and video outputs
from
a video tape recorder
or other
video sources to these two connectors.
Or use
these connectors
to produce
signals bridged from the VTR connect-
ed to the 8-pin connector
® .
PAL/AUTO/SECAM
colour
system
select switch
PAL:
Set to this position when the
input signal conforms to PAL.
AUTO:
The circuit is automatically
switched
either for PAL
or
SECAM
depending
on
the
input signal. This position is
sufficient for most purposes.
SECAM:Set
to
this
position
when
the
input
signal
conforms
to SECAM.
VIDEO LINE IN BNC connector
AUDIO LINE IN DIN (5-pin) socket
Connect the audio and video outputs
from
a video tape recorder or other
video sources to be monitored to these
two connectors.
OUTPUT VIDEO BNC connector
28. 75 Q
27. OUTPUT AUDIO DIN (5-pin) socket
Use these connectors to produce audio
and video signals being monitored with
the front panel input select switches or
bridged from the LINE connectors @
and @.
termination/OUTPUT
select
switch
Set this switch to 75 Q to terminate
the input signals connected to the LINE
VIDEO
IN and
AUDIO
IN connec-
tors @ and @. Or set this switch to
OPEN
BRIDGE
OUT when you wish
to
make
available
at the OUTPUT
VIDEO
and-AUDIO.
connectors
-@
and @ signals connected to the LINE
connectors @ and ® .
To monitor signals applied to the 8-pin VTR
connector
@ or the audio and video input/
output
connectors
@
and
@,
push
the
front panel INPUT SELECT "VTR'"' switch.
To monitor signals applied to the video and
audio
LINE connectors
@
and
@, push
the
front
panel
INPUT
SELECT
"LINE"
switch.
Advertisement
