Table of Contents
Advertisement
Manual ARE i2.0x SEMI release V2
2.3.9 LED Setup help (FLED)
In order to locate the respective ARE i2.0 SEMI hooked up to a particular RS 232 port, the instruction FLED is used.
This instruction flashes the LED in white for 10 seconds. The color can not be changed.
Input format:
FLED<CR>
Hex:
4C
ASCII:
'F'
Output: FLED<CR>
Hex:
4C
ASCII:
'F'
After flashing for 10 seconds ARE i2.0x SEMI returns to standby mode.
2.3.10 LED (De)activate LED functionality (LED)
In order to deactivate (or activate) the LED functionality, LED instruction is used.
Input format:
LED<SP>Parameter<CR>
Hex:
53
ASCII:
'L'
Output:
0<CR>
Hex:
30
ASCII:
'0'
LED<SP> 0<CR> deactivates LED functionality.
LED<SP> 1<CR> activates LED functionality (default).
Above examples represent ARE i2.0 SEMI default values.
Manual ARE i2.0x SEMI release V2.docx
53
54
42
'L'
'E'
'D'
53
54
42
'L'
'E'
'D'
54
42
'E'
'D'
<SP>
0D
<CR>
0D
<CR>
0D
<CR>
20
30
OD
'0'
<CR>
Version: 13
Page: 22 / 26
Advertisement
Table of Contents
