Table of Contents
Advertisement
Type identification
The model and frame number can be found on the floor on the right side of the passenger seat, on a sticker
on the B-pillar of the driver side, and behind the front windscreen on the driver side. The characters 4 thru 6
of the VIN will show the model number RS5 or RS6 (FHEV), or RS8 (PHEV).
Stamping position floor
About hybrid vehicles
The high-voltage system of the CR-V FHEV and PHEV uses a total voltage of more than 260 V. Rescue
operations therefore require attention to and response to high voltages.
•
If the orange high-voltage cable or high-voltage cover is damaged and exposed wiring or
terminals are found, never touch these exposed parts. Also, if you are unsure whether the
exposed wires or terminals are high voltage parts or not, do not touch them. Unintentional
touching may result in serious injury or death due to severe burns or electric shock.
•
If you have no choice but to touch or may touch the exposed parts of the high-voltage cables
or high-voltage components, always wear insulating protective equipment (insulated gloves,
protective glasses and insulated shoes).
The following items should be prepared in advance for CR-V FHEV and PHEV rescue activities.
(1) Insulated protective equipment (insulated gloves, safety glasses, insulated shoes)
(2) ABC fire extinguisher
Protective equipment for solvents [gas mask (for organic gases), rubber gloves (for chemical resistance)].
•
High-voltage sites
•
The high-voltage sections of the CR-V FHEV and PHEV are shown below
•
The area enclosed by the dotted line in the illustration shows the high-voltage area
•
High-voltage cables can be identified by their orange colour
Honda CR-V FHEV / PHEV
Sticker B-pillar driver side
VIN behind front windscreen
7
Advertisement
Table of Contents
