Installing The Software; Windows 3.1 - Panasonic KX- P3196 Operating Instructions Manual

20
Installing the Software
These Setup Disks ("DOS Utilities & Printer Driver for Windows® 3.1" disk, "Printer Driver for Windows® 95,
Windows® 98, Windows NTG 3.5x and Windows NT® 4.0" disk) can only be used in an IBM-PC or a compatible
computer with a 3.5" floppy disk drive.
Before using the Setup Disk, it is recommended that you make a back-up copy and store the original in a safe place.
The following steps will automatically create a directory called P3196 and copy Control Panel Software
(CPS 3196.EXE) and Command Reference utility (CMDREF.EXE) from the "DOS Ultilities & Printer Driver for
Windows® 3.1" disk to your C Drive. (You can change the directory and drive.)
Note:
e Control Panel Software and Command Reference utility cannot be installed on Windows NT.
Program
Control Panel Software Allows you to view and change the printer settings on the computer screen.
Command Reference utility Allows you to access a detailed explanation of each software command on the
computer screen.
Follow the steps below for installation.
1 Insert the "DOS Utilities & Printer Driver 3 Type SETUP and press (Enter).
for Windows® 3.1" disk into drive A (or B).
4 Follow the instructions on your computer
2 Type A: (or B:) and press (Enter ). screen.
Windows 3.1
| Progam «— | «X^. à— à sfFuntion — — — — —
Printer Driver A printer driver is the part of the software that allows the software to
communicate with the printer via the interface in use.
Control Panel Software Allows you to view and change the printer settings on the computer screen.
Command Reference utility Allows you to access a detailed explanation of each software command on the
computer screen.
Follow the steps below for installation.
1 Insert the "DOS Utilities & Printer Driver 4 Type A:\SETUP (or BASETUP) and then
for Windows® 3.1" disk into drive A (or B). press (Enter )(or click [OK ]).
2 Click from the Program Manager 5 Follow the instructions on your computer
window. screen.
3 Click [Run...].