Table of Contents
Advertisement
Quick Links
We advise you to read this manual carefully, which contains all the instructions for maintaining the
appliance's aesthetic and functional qualities. For further information on the product: www.smeg.com
These instructions apply only to the destination countries listed on the appliance's data plate.
This is a class 3 built-in hob.
PRECAUTIONS
General safety instructions
Risk of personal injury
• During use the appliance and
its accessible parts become
very hot. Keep children well
away from the appliance.
• Protect hands with heat resistant
gloves during use.
• Never try to put out a fire or
flames with water: Turn off the
appliance and smother the
flames with a fire blanket or
other appropriate cover.
• This appliance may only be
used by children aged 8 years
91477A183/C
3
3
7
8
8
9
9
9
9
9
10
10
10
11
12
12
12
12
13
and over, and by people of
reduced physical, sensory or
mental capacity, or lacking in
experience in the use of
electrical appliances, provided
that they are supervised or
have been given instructions on
the safe use of the appliance
and of the hazards associated
with it.
• Children must not play with the
appliance.
• Keep children under the age of
eight at a safe distance unless
they are constantly supervised.
13
16
18
18
20
20
21
21
21
22
22
22
24
25
25
25
26
26
27
27
PRECAUTIONS - 3
Advertisement
Table of Contents
Related Manuals for Smeg SAIG6954R
Summary of Contents for Smeg SAIG6954R
-
Page 1: Table Of Contents
We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance’s aesthetic and functional qualities. For further information on the product: www.smeg.com These instructions apply only to the destination countries listed on the appliance's data plate. - Page 2 • Keep children under the age of dangerous and can cause a 8 away from the appliance fire. when it is in use. • Fats and oils can catch fire if • Cleaning and maintenance they overheat. Do not leave the must not be carried out by appliance unattended while unsupervised children.
- Page 3 materials near the appliance or surface breaks, turn off the directly underneath the hob. appliance immediately. • Switch off the appliance Disconnect the power supply immediately after use. and call Technical Support. • Do not pull the cable to unplug •...
- Page 4 • If any liquid does boil over or Risk of damaging the appliance spill, remove the excess from • Do not use abrasive or the hob. corrosive detergents (e.g. • Take care not to spill acid scouring powders, stain substances such as lemon juice removers and metallic or vinegar on the hob.
-
Page 5: Installation
dishwasher. of the hose does not exceed 2 • This appliance is not designed metres when fully extended for to operate with external timers steel hoses and 1.5 metres for or with remote-control systems. rubber hoses. • The gas connection hoses must Installation not come into contact with •... -
Page 6: Appliance Purpose
it does not come into contact overvoltage conditions, with the lower part of the hob pursuant to installation or a built-in oven below it. regulations. • Be careful when connecting • This appliance can be used up additional electrical to a maximum altitude of 2,000 appliances. -
Page 7: Manufacturer's Liability
Manufacturer’s liability • When preparing dishes with long cooking times, you can save time and energy by The manufacturer declines all liability for using a pressure cooker, which also helps to damage to persons or property caused by: retain vitamins contained in the food. •... -
Page 8: Description
DESCRIPTION General description • UR: Ultra-rapid burner • 3: Control panel • 1, 2: Induction cooking zones Power draw in Power draw in Dou- Dimensions H x L Max. power draw Zone booster function (W) ble Booster function (mm) (W)* (W)* 1 - 2 182 x 218... -
Page 9: Accessories
Advantages of induction cooking Warming function icon: indicates the activation of the keep warm function. The appliance is equipped with an induction generator for each cooking Key icon: indicates the activation of the zone. Each generator located under the controls lock function. glass ceramic cooking surface creates Clock icon: indicates the timing of a an electromagnetic field which induces... -
Page 10: Use
supplied by the manufacturer. Wok support Useful when using a wok. Precautions Using the accessories Trivet See General safety instructions. The trivets and reduction pan supports must be placed on the hob pan supports. Make sure A gas leak can cause an explosion. they are placed properly. -
Page 11: Basic Functions
the burner does not light in the first 15 seconds, pan sizes indicated in the following table. turn the knob to and wait 60 seconds Minimum diam- Recommended Cooking zones before trying again. After lighting, keep the knob eter (mm) diameter (mm) pressed in for a few seconds to allow the 1 - 2 (Single) - Page 12 matching fixing pins on the surface. Booster or Double Booster function (see specific sections). The display of the zone being used will indicate the selected power level. The power level can also be selected by pressing the scroll bar at the point Make sure that the pan supports are simply that corresponds to the required power centred on their respective burners, without...
- Page 13 Booster function Bridge function (on some zones only) This function automatically divides the See General safety instructions. power equally between both zones that are in use. The Booster function allows you to heat a pan at This function allows you to operate two cooking maximum power for a limited amount of time.
-
Page 14: Additional Functions
Correct pan position Modifying and deactivating the minute minder timer To modify or deactivate the timer during the countdown: 1. Press the button to activate the hob (if it is off or in stand-by). 2. Press the buttons together. 3. Use the buttons to modify the countdown or reset the timer. - Page 15 This function can be deactivated by selecting 3. Use the buttons to select the and a different power level or by switching the required time; press and hold to advance appliance off. more quickly. Pause function (on some models only) 4.
-
Page 16: Special Functions
2 Timed cooking. function. 3 Bridge Function. Auto-Vent 2.0 function (on some models 4 Rapid heating. only) 5 Booster and Double Booster Functions. • This function allows you to control 6 Controls lock. the speed of the hood extractor fan via a wireless connection. - Page 17 option (option U0), which should only be progressive number on the timer display. modified by the installer (see "Power limitation Option Description procedure"). Power limitation (kW) - Modifica- Use the buttons to move between tion restricted to the installer the options. Activation and deactivation of the To select the values for each option, press the Auto-Vent 2.0 function (on some...
-
Page 18: Safety Features
When certain safety thresholds are reached, on 2 Press the button for at least two or more cooking zones are deactivated. At the seconds. Changes will not be saved and the end, if the internal temperature is very high, the hob will restart, but it will still be powered. -
Page 19: Cleaning And Maintenance
overheating. If this occurs, you should switch off If these errors persist or if other errors appear, the appliance immediately, remove all pans and make a note of the code and contact Technical let it cool down. Support. CLEANING AND MAINTENANCE Cleaning the hob Cleaning the glass ceramic hob Cooking hob pan support grids... -
Page 20: What To Do If
remove using conventional cleaning products. It residential electrical system has not tripped. may be necessary to repeat the cleaning In this case, reset the circuit breaker. process several times. Use of corrosive The cooking results are unsatisfactory: detergents or rubbing of pan bases can wear •... - Page 21 positioned correctly. must be replaced and the primary air must be adjusted. The top of the hob has to be removed After installation, the installer MUST check for in order to replace the nozzles and adjust the gas leaks and test each burner individually to burners.
-
Page 22: Burner And Nozzle Characteristics Tables
spindle (depending on the model) until the Replacing nozzles correct minimum flame is achieved. 1. Loosen the screw A and push the air 3. Refit the knob and verify that the burner regulator B as far as it will go. flame is stable. -
Page 23: Electrical Connection
The nozzles not provided are available at Authorised Service Centres. Power limitation procedure Electrical connection • This procedure is restricted to the See General safety instructions. installer. • The appliance is factory set to General information maximum power. Check the mains characteristics against the data In order to modify the maximum power indicated on the plate. -
Page 24: Minimum Distance From Combustible Surface
oven, the oven must be fitted with a cooling adhesive seal provided along the entire outer fan. edge of the hob before assembly. Appliance overall dimensions (mm) Do not use silicone to secure the hob. This would make it impossible to remove L 900 the hob without damaging it. -
Page 25: Fastening To The Built-In Cabinet
Instructions for the installer 1 Opens on bottom • If you use a plug to connect to the power 2 Opens on bottom and back supply, the plug must be accessible after On an empty kitchen installation. • Do not bend or trap the power cable. If there are other pieces of furniture under the hob, a double-layer wooden base must be •...