Advertisement
Quick Links
Advertisement
Related Manuals for Asus PG27AQDM
Summary of Contents for Asus PG27AQDM
-
Page 1: Cover
Monitor Service Manual Model: PG27AQDM Version no. 01 Release date: 2023/09/15... -
Page 2: Copyright/Limitation Of Liability/Service And Support
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property;... -
Page 3: Table Of Contents
Table of Contents Section PAGE Cover ......................1 Copyright/Limitation of liability/Service and support ......... 2 Table of Content ..................3 Safety Precautions ..................4 Exploded View .................... 5 Disassembly and Assembly Procedures ............6 Trouble Shooting ..................12... -
Page 4: Safety Precautions
1. Safety Precautions Safety information Before setting up the monitor, carefully read all the documentation that came with the package. To prevent fire or shock hazard, never expose the monitor to rain or moisture. Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. -
Page 5: Exploded View
2. Exploded View... -
Page 6: Disassembly And Assembly Procedures
3. Disassembly and Assembly Procedures 3.1 Disassembly Procedure Preparation before disassemble 1.Clean the room for disassemble 2.Identify the area for monitor 3.Check the position that the monitors be placed and the quantity of the monitor; prepare the area for material flow; according to the actual condition plan the disassemble layout 4.Prepare the implement, equipment, and materials as below: 1) Working table... - Page 7 Step.3 Remove the Rear Cover and pull out display key connectors. Step.4 Remove 4 screw then pull out LVDS FFC 51P & LVDS FFC 41P & panel By Screw driver Screw: M3x4 / T3x6 power connector. Force: Force:4-5 kgf.cm Step.5 Unscrew 2 screws and then pull out the main-board from shielding. By Screw driver Screw: M3x5 Force: 5-7 kgf.cm...
- Page 8 Step.7 Disassembly display key board / stand power board / led board. Remove deco mylar and unscrew 2 screws and disassemble key pcb from rear By Screw driver Screw: T2.5x5 cover. Separate joystick key from display key pcb. Force: 2-3 kgf.cm Unscrew 2 screws and disassemble stand power pcb from rear cover.
- Page 9 3.2 Assembly Procedure Step Tool Note Step.1 Assemble display key board / stand power board / led board. Lock 3 screws and assemble ROG cover / led pcb to rear cover. By Screw driver Screw: T3x6 Force: 3-4 kgf.cm Lock 2 screws and assemble stand power pcb to rear cover. By Screw driver Screw: T3x6 Force: 3-4 kgf.cm...
- Page 10 Assemble joystick key to display key pcb. Lock 2 screws and assemble key pcb By Screw driver Screw: T2.5x5 to rear cover and stick deco mylar. Force: 2-3 kgf.cm Step 2. Lock 11 screws and assemble MID FRAME and LCM. By Screw driver Screw: M3x4 Force:4-5 kgf.cm...
- Page 11 Step.5 Insert display key & LED board & stand power connectors and assemble the rear cover. Step.6 Push into hooks between MID_FRAME and R/C and lock 2 screws. By Screw driver Screw: M4x10 Force: Force:5-7 kgf.cm Step. 7 Press release button then insert the Stand Riser. Insert the Stand Base By hand or Stand Base Screw: M5 x 25 then lock one screws.
-
Page 12: Trouble Shooting
4. Trouble Shooting Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is turned on. • Check if the adapter and power cord are properly connected to the monitor and the power outlet. •...