Wm Appliance Control Panels; Diagnostics System; Accessing Diagnostics; Quitting The Diagnostics System - Electrolux EWM09312 Service Manual

Hide thumbs Also See for EWM09312:

Table of Contents

2 WM APPLIANCE CONTROL PANELS

These are the stylings available at the time of printing of this Service Manual. Others may be developed in

future.

TC4

TC5

The operations listed below must be carried out within 7 seconds.

Set the selector dial to position 0 (zero).

Rotate the programme selector by one position clockwise.

Simultaneously press the START/PAUSE button and the nearest sensor option (as shown in the

diagram).

Keep your fingers above the sensors until the LEDs and display symbols start flashing.

In the first position, the operation of the buttons and the related LEDs is checked; turning the programme

selector dial clockwise runs the diagnostic cycle for the operation of the various components and reads

any alarms.

3.2

→ To exit the diagnostics system, turn the selector dial to position 0, turn the appliance back on and return

the dial to position 0.

2012 SOE/DT-mdm FCPD-dp

Guide to diagnostics of EWM09312 electronic controls

TC4

8/69

TC5

599 75 18-74 Rev.00

Table of Contents