Table Of Contents; Power Supply Setting; Connections; Connecting Headphones (Cd720 Only) - Philips CD 710 Manual

CONTENTS
INSTALLATION
PAGE
INSTALLATION.5
Power supply setting...........................5
Connections........ ............5
Connecting headphones (CD720 only)...........5
FUNCTIONAL OVERVIEW.6-7
Front of player.... 6
Remote control (CD720 only)......6
Display.. 7
Display messages... .7
PLAYBACK.8-10
Normal playback.. .....8
Selecting another track......................9
Searching fora passage..............9
Starting with a particular track .........................9
Playing the CD in random order....... 9
Repeating play................9
Calling up other time information ..9
Searching the loudest passage......10
Setting the fade-in and fade-out time ............10
Scanning a CD (CD720 only)...10
Adjusting the sound level (CD720 only)........ 10
PROGRAMMING.11
Storing a programme.... .........11
Playing the programme.....11
Erasing a programme........11
ADDITIONAL INFORMATION.12
Maintenance. 12
Recycling.. ..................12
Technical data............. ....12
Troubleshooting.13
POWER SUPPLY SETTING_
• Check that the type plate at the bottom of your
player indicates the correct supply voltage.
• This player is equipped with a
voltage selector at the bottom
which enables you to set the
player to the correct mains voltage.
Position 120 V: for all mains volt¬
ages between 110V and 127 V.
Position 230 V: for all mains voltages between
220V and 240 V.
CONNECTIONS
1 2
1 Mains connection
• Connect the mains lead to your mains supply.
2 Connecting cable to the amplifier
• insert the red plug (right channel) and the white
plug (left channel) into the corresponding sock¬
ets of the CD or AUX input of your amplifier.
You can also use the TUNER or TAPE IN-
connection, but never the PHONO input!
CONNECTING HEADPHONES
(CD720 only)
• Connect headphones
with a 6.3 mm jack
plug to the PHONES
socket
11
.
• The sound level is
adjusted with the
LEVEL control 13.
5