Advertisement
Having removed the outer carton,
reinforcing angles and polythene
wrapping, you must take out the internal
packing which protected the appliance's
«works» during transit.
1
Undo and remove the four bolts from the
back of the appliance (figure 1).
2
Each bolt leaves behind a cardboard
spacer inside the machine, this should be
worked loose by inserting a screwdriver
into the bolt hole and allowing it to drop
to the bottom of the machine.
Tilt the machine backwards and remove
the two inner angle packings by pulling
the two cardboard bands (figure 2).
Pull out the right band A first and then
the left band B.
4
Lift the machine and remove the
polystyrene base packing.
It is advisable to keep all parts of the
inner packing for re-use in case the
machine has to be transported again.
Advertisement
