Table of Contents
Advertisement
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model
properly. After you have finished
reading the instructions, put them away in a safe place for future
reference.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE
FICHE POLARISEE
AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF Si LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
THE POWER
SWITCH
IS SECONDARY
CONNECTED
AND
THEREFORE DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION.
WARNING:
To PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RETURN function
This function returns the unit to its initial settings with the
tuner ready to receive a broadcast. This is helpful during
troubleshooting or when no sound is output. For details, refer
to page 44.
RESET function 1 (VSX- D606S Only)
Set the MASTER
VOLUME
to minimum
before pressing the
RESET button.
Use this function when normal operation is not possible due
to external influences such as static electricity or lightning, or
when operations are not functioning even when the operation
switches are pressed. Press the RESET
button to return to
normal operating conditions.
2
<ARB7091>
» NOTE:
~~ your dealer for correct information.
TWO VOLTAGE SELECTOR
SWITCHES
Only multi-voltage model is provided with
these switches. U.S. and Canadian mod-
els are not provided with these switches.
Mains voltages in Saudi Arabia are 127 V
and 220 V only. Never use this model with
the 110 V setting in Saudi Arabia.
The line voltage selector switches are on the rear panel. Check
that they are set properly before plugging the power cord into the
household wall socket. If the voltage is not properly set or if you
move to an area where the voltage requirements differ, adjust the
selector switches as follows.
1. Use a medium-size screwdriver.
2. First, insert the screwdriver in the groove of the voltage selector
at the left, and adjust so that the tip of the groove points to the
voltage value of your area.
3. Next, insert the screwdriver in the groove of the voltage selector
at the right and adjust until the voltage is the same as at the left.
TWO VOLTAGE SELECTORS
410V
120-127V
ae
iss
7
uo
2eov |
\\240V 349
110V
120- Tay
Mecium-size screwdriver
CHANNEL STEP SWITCH
(Multi-voltage model only)
The unit has been factory preset to the channel allocation value
for the area in which it is to be sold. If this value is set incorrectly,
the tuned in frequency may be wrong, or sound may be distorted,
resulting in an inability to reproduce reception signals at their
proper sound quality. For this reason, be sure to confirm that the
values are set correctly before first using the unit.
(FM 100 kHz/AM 10 kHz) position:
Set to this position for areas with an FM reception step of 100 kHz
and AM 10 kHz.
(FIM 50 kHz/AM 9 kHz) position:
Set to this position, for areas with an FM reception step of 50 He
and AM 9 kHz.
When unsure about the channel allocation for your area, cons
AM
FM
Eas
SkHz
SOkHz
-~
|
VOkKHz
100kHz
S
CHANNEL
STEP
Advertisement
Table of Contents
