GE GTW540 Owner's Manual & Installation Instructions page 9

Getting started
D
Wash Cycles - Cycle Selector Knob
Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance
WARNING
condition that could result in physical injury, property damage, and/or appliance damage.
For Waterproof, Water-Resistant, or Bulky:
• Only use the Bulky (or Delicates) cycle.
• Using other cycles can cause excessive vibration and may result in injury or damage to the washer, walls, or
floor.
• Do not mix waterproof and non-waterproof items.
• Read the Owner's Manual for wash cycle details.
The wash cycle controls the type of washing process. The cycle selector knob can be turned in either direction. Turning the knob
after starting a cycle will stop the washer and change the cycle/options to the new selection. Press Start to begin the new cycle
selection.
The following chart will help you match the items to be washed with the best wash cycle settings. For optimal performance, select
the cycle that most closely matches the items being washed.
Selections and options shown in bold are the recommended settings for that cycle.
Some cycles and options may not be available on some models.
49-3000373 Rev 0
9