Related Manuals for Smeg WNP96SLAA
Summary of Contents for Smeg WNP96SLAA
- Page 1 WNP96SLAA Washing Machine User’s Manual Document Number : 2820530113_EN/ 16-06-22.(11:15)
-
Page 2: Table Of Contents
Programme and Consumption Table of Contents Table ..........1 Safety Instructions ......Programme Selection ....24 Intended Use ........ Programmes ........25 Safety of Children, Vulnerable Per- Temperature Selection ....27 sons and Pets ......Spin Speed Selection..... 27 Electrical Safety ......Auxiliary Function Selection.... - Page 3 Please read this user manual first! Dear Customer, Thank you for choosing Smeg product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
-
Page 4: Safety Instructions
1 Safety Instructions This section includes the safety – Personnel kitchens of instructions necessary to pre- stores, offices and other vent the risk of personal injury or work environments; material damage. – Ranches, Our company shall not be held – By customers of hotels, mo- responsible for damages that tels and other accommoda- may occur if these instructions... -
Page 5: Electrical Safety
with, climb on top or inside the • If the power cable is dam- product. Check inside the aged, it must be replaced by product before use. the authorised service in order • Use child lock to prevent chil- to avoid possible risks. dren from intervening with the •... -
Page 6: Handling Safety
make sure the electrical Handling Safety mains, clean water mains and • Unplug the product before water outlet are suitable. If not, moving, remove the water out- call a qualified electrician and let and water main connec- plumber to have them make tions. -
Page 7: Operational Safety
• Connect the product to a valve should be fitted. The grounding plug protected by a maximum allowed temperat- fuse suitable to the current val- ure is 25°C. ues on the type label. Make • Fit the end of the water dis- sure the grounding is carried charge hose to the dirty water out by an expert electrician. - Page 8 • Do not use chemical solvents • Do not force open the locked on the product. These materi- loading door. The door will als contain an explosion risk. open once the washing is • Do not operate defective or completed. If the door does damaged products.
-
Page 9: Maintenance And Cleaning Safety
• Take the following precautions • Do not use sharp or abrasive to prevent formation of biofilm tools to clean the product. Do and malodours: not use household cleaners, soap, detergent, gas, gasol- – Make sure the room where ine, thinner, alcohol, varnish, the washing machine is etc. -
Page 10: Package Information
2.2 Package Information Packaging materials of the product are man- ufactured from recyclable materials in ac- cordance with our National Environment Regulations. Do not dispose of the pack- aging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities. -
Page 11: Technical Specifications
3 Technical Specifications Supplier’s name or commercial brand Smeg WNP96SLAA Model name 7177882300 Nominal Capacity (kg) Maximum spin speed (cycle/min) 1600 Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet + / - Electrical input (V/Hz) -
Page 12: Installation
4 Installation • Total weight of the washing machine and Please read the “Safety Instructions” the dryer -with full load- when they are section first! placed on top of each other reaches to approx. 180 kilograms. Place the product Your washing machine automatically on a solid and flat floor that has sufficient detects the amount of laundry load carrying capacity. -
Page 13: Removing Transportation Safety Bolts
Cover B NOTICE Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly Rest the tabs of Cover B against the lower fixed in place. -
Page 14: Connecting The Drain Hose To The
longer than 3.2 m. To prevent water 4.5 Connecting the Drain Hose to leaks, always secure the connection the Drain between the extension hose and the a. Attach the end of the drain hose directly draining hose of the product with a suit- to waste water drain, washbasin or able clamp so that it does not come off bathtub. -
Page 15: Start Up
• If the current supply to the fuse or breaker tion”. To prepare the product for washing in the house is less than 16 Amps, have a laundry, perform first operation in Drum qualified electrician install a 16 amp sup- Cleaning programme. -
Page 16: Tips For Energy And Water Saving
The product automatically adjusts the water 5.3 Tips for Energy and Water Sav- amount according to the weight of the laun- dry put inside it. Following information will help you use the product in an ecological and energy/water- Follow the instructions in “Pro- efficient manner. -
Page 17: Automatic Dosing
• Do not leave the detergent drawer open Filling Liquid Detergent and Softener when the washing programme is on. a. Open the detergent compartment by • Do not select a programme with pre- pulling it towards yourself. washing if you are using a detergent pod or dispensing ball. -
Page 18: Dosage Selections, Cancellation Or Use Of Powder Detergent
5.6.2 Dosage Selections, Cancella- tion or Use of Powder Deter- gent We recommend filling the detergent com- partment with liquid detergents that can be used in common for coloured and white Liquid detergent cannot be selected in some of the programs. Powder detergent must be laundry. -
Page 19: Detergent And/Or Softener Running Out
5.6.3 Detergent and/or Softener Liquid detergent and softener dosing symbols become active or inactive according to the program selected on Running Out the screen. When the detergent or the softener put in- First position on the display means liquid deter- side the detergent drawer finishes, the gent is active, softener is on. -
Page 20: Displayed Programme Duration
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate... -
Page 21: Control Panel
6.1 Control Panel 1 Programme Selection Button 2 Spin Speed Adjustment Button 3 Temperature Setting Button 4 Display 5 ON/OFF Button 6 Start/Pause Button 7 End Time Setting Button 8 Auxiliary Function Button 6 9 Auxiliary Function Button 5 10 Auxiliary Function Button 4 11 Auxiliary Function Button 3 12 Auxiliary Function Button 2 13 Auxiliary Function Button 1... -
Page 22: Symbols On The Display
6.2 Symbols on the Display 1 Temperature Indicator 2 Auxiliary Function Indicators 1 3 Auxiliary Function Indicators 1 4 Programme follow-up indicator 5 Duration information 6 Programme Start Indicator 7 Delayed Start Enabled Indicator 8 Door Lock Engaged Indicator 9 Auxiliary Function Indicators 6 10 Child Lock Engaged Indicator 11 Auxiliary Function Indicators 5 12 No Water indicator... -
Page 23: Programme And Consumption Table
6.3 Programme and Consumption Table Auxiliary Functions Programme Temperature °C 2,75 1600 • • • • • • • Cold - 90 Cotone 2,00 1600 • • • • • • • Cold - 90 1,10 1600 • • • •... -
Page 24: Programme Selection
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine. -
Page 25: Programmes
but effective washing performance is en- Programmes are limited to the sured with intense washing movements. If highest spin speed appropriate for the quick wash function is not selected, ef- that particular type of fabric. fective washing and rinsing performance is When selecting a programme, al- ensured for your heavily soiled laundry. - Page 26 • Camicie the loading door half closed after the pro- gramme ends for the inside of the machine This programme is used to wash the shirts to dry. made from cotton, synthetic and synthetic blended fabrics altogether. It reduces This is not a washing programme. wrinkles.
-
Page 27: Temperature Selection
such as gore-tex etc. It makes sure your indicator. It is possible that the recommen- garments are washed gently thanks to spe- ded spin speed value is not the maximum cial rotating movements. spin speed that can be selected for the cur- rent programme. -
Page 28: Auxiliary Function Selection
If you want to spin the laundry held in water, When an auxiliary function button adjust the Spin Speed and press Start/ that cannot be selected with the cur- Pause button. The programme will resume. rent programme is pressed, the Water is drained, laundry is spun and the washing machine will make a warn- programme is completed. -
Page 29: Functions/Programmes Selec
You can reduce the time for your lightly • AutoDose soiled laundry by pressing the Fast/Intensive You can change your dosage and detergent button in the programmes which come with preferences with this auxiliary function but- intense being selected. When you press the ton. -
Page 30: End Time
• Automatic Dosage Setting • Child Lock Activates by pressing down the related auxil- Use Child Lock function to prevent children iary function key (Automatic Dosage) for 3 from tampering with the machine. Thus you seconds. With this function, the dosing can avoid any changes in a running pro- amounts of the Liquid Detergent and gramme. -
Page 31: Starting The Programme
Programme duration may differ from When you have activated the End the values in section "Programme Time function, do not add liquid de- and consumption table" depending tergent in the powder detergent on the water pressure, water hard- compartment no 2. There is the risk ness and temperature, ambient tem- of staining of the clothes perature, amount and the type of... -
Page 32: Loading Door Lock
c. Pull down the loading door emergency If no programme is started or no handle with a tool and release. Then button is pressed within 10 minutes open the loading door. during programme selection pro- cess, the product will automatically d. -
Page 33: Cancelling The Programme
Switching the machine to pause mode: 6.13 Cancelling the Programme Press the Start/Pause button to switch the When the machine is turn on and off the pro- machine to pause mode. Pause symbol will gramme gets cancelled. Press and hold On/ flash on the display. - Page 34 • If you are not satisfied with the washing It is recommended to wear a suit- results, it may be that the detergent or able glove so that you do not come softener has become stiff and therefore into direct contact with the detergent cannot be taken into the washing area, and other washing materials that you •...
-
Page 35: Cleaning The Loading Door And The Drum
g. The guides holding the top cover of the Foreign metal substances will cause rust detergent drawer are removed with a flat- stains in the drum. Clean the stains on the head screwdriver (there are total of 6 drum surface by using cleaning agents for guides, two each on the right, left and stainless steel. -
Page 36: Draining Remaining Water And Cleaning The Pump Filter
c. Take out the filters on the flat ends of the b. Open the filter cover. water intake hoses together with the gas- kets and clean thoroughly under running water. d. Replace the gaskets and filters carefully and tighten their nuts by hand. 7.5 Draining Remaining Water and Cleaning the Pump Filter c. -
Page 37: Troubleshooting
8 Troubleshooting • A hard substance has entered into the Please read the “Safety Instructions” pump filter. >>> Clean the pump filter. section first! • Transportation safety bolts are not re- moved. >>> Remove the transportation Programmes do not start after the load- safety bolts. - Page 38 • Loading door may be stuck because of • Timer may stop during spinning step. >>> the pressure it is subjected to. >>> Grab Automatic unbalanced load detection sys- the handle and push and pull the loading tem is activated due to the unbalanced door to release and open it.
- Page 39 Washing performance is poor: Stains • A higher temperature was selected. >>> persist or the laundry is not whitened. Select the proper programme and temper- (**) ature according to the type and soiling de- gree of the laundry. • Insufficient amount of detergent is used. >>>...
- Page 40 step. Wash and clean the drawer with hot • Detergent was stored under improper water. Put the detergent in the correct conditions. >>> Store detergent in a compartment. closed and dry location. Do not store in • Detergent was mixed with the softener. excessively hot places.
- Page 44 The original spare parts for some specific components are available for 10 years from the placing on the market of the last unit of the model. Visit our website to: Get usage advice, download user manuals, get service and repair information www.smeg.com/services/customer-service...