Time-Out Timer
When pressing the PTT button, transmissions
can be terminated by setting up a 'time-out'
timer.
Power Select
Power Select allows you to select between
high and low transmission power per frequency
in each channel. The power levels for RM
Series 2W toggle between 1W and 2W.
Note:
Some frequencies may have FCC transmit
power restrictions that do not allow them to
be set at a higher power level. For details
see the Frequencies and Code Chart
Section.
Call Tones
Call Tones feature allows you to transmit to
other radios in your group by alerting them
that you are about to talk or alerting them
without speaking.
Scramble
The Scramble feature makes transmissions
sound garbled to anyone listening without the
same code. Scramble default value is OFF.
Reverse Burst
Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
You can select values of either 180/240.
Notes:
•
The features described in previous pages are just
some of the features CPS has. CPS offers more
capabilities. For more information refer to the
HELP file in the CPS.
•
Some of the features available with the CPS
software may vary depending on the radio model.
49
English