Download Print this page

Placing The Speaker; Specifications - Yamaha NS-5 User Manual

Natural sound bass-reflex type 2-way speaker system

Advertisement

PLACING THE SPEAKER

● Place the speaker on a sturdy, vibration-free sur-
face.
If you cannot obtain good bass quality when the
speaker is placed directly on the floor, insert a block
etc. between the speaker and the floor.
● Since this speaker has an opening on the rear panel
to decrease pressure inside the cabinet, it is recom-
mended to place it at least 10 cm (3-15/16") apart
from the wall.
● Better stereo images will be obtained when the
speakers are slightly angled in towards the listener.
Note
Though this speaker is a magnetic shielding type,
there may be an influence on TV picture accord-
ing to the type of TV or the placement of the
speaker. In such a case, place the speaker apart
from the TV so that there is no influence on TV
picture.
REMOVING THE FRONT COVER
The front cover is fastened to the enclosure at four
points, and can be removed if desired. To remove the
cover, hold on to both sides and slowly pull straight
away from the speaker. To reattach, line up the four
pegs on the inside surface of the cover with the four
corresponding holes on the speaker and push gently.
Note
When the cover is removed, take care not to touch
the speaker units with your hands or to exert exces-
sive force with tools.
This bass-reflex type speaker has an opening on
the rear panel.
Be careful not to obstruct the opening or put some
objects into it. If doing so, the sound will be unnat-
ural or it may cause damage to the speaker
and/or amplifier.
Opening

SPECIFICATIONS

Type ......................2 way bass-reflex speaker system
Magnetic-shielding type (EIAJ)
Speaker Unit ............13 cm cone woofer (JA1302) x 1
Tweeter (JA05C6) x 1
Nominal Impedance.........................................6 ohms
Frequency Response ...........55 Hz – 30 kHz (–10 dB)
Nominal Input Power............................................40W
Music Input Power................................................80W
Sensitivity ...................................................90 dB/w/m
Dimensions (WxHxD)..................206 x 338 x 250 mm
1
(8-
/
" x 13-
8
Weight.........................................6.5 kg (14 lbs. 5 oz.)
Accessories ............................Speaker cable (4m) x 2
* Specifications subject to change without notice due
to product improvements.
* Care should be taken not to exceed the input power
values noted above.
5
13
/
" x 9-
/
")
16
16

Hide quick links:

Advertisement

loading