Table of Contents
Advertisement
MEMORIZING THE CONTROL INSTRUCTIONS FOR PLAYING
TO PLAY SEGMENTS AT FAST (x3), NORMAL OR SLOW (x1/5) SPEEDS
For example, if you want to enter the control instructions
"Play Segment 2 at slow (x1/5) speed" on Line 042, proceed
as follows:
Step
Keys to be pressed
[PGM] [4] [2]
[ENTER]
042 FUNCTION?
'-1ine number
1.
2.
3.
•- -For playback at normal
IP!Md, skip this step.
[2)
(segment number)
• To play Segment 1,
[EN~r-7~"YY_;:~s
042 SLOW S-001
\
s}gment number
" '
to be played
playback speed
042 SLOW S-002
044 FUNCTION?
• For the following control instructions, repeat these steps.
• To end entering control instructions, press the [ENTER]
key again.
TO SELECT AUDIO CHANNEL 1 OR 2
Both audio channels will be played back in normal opera-
tion. However, you can select the audio of either channel 1
or 2 alone in this way:
1. Display the "000 FUNCTION?".
2. Press the [CH-1] key for channel 1 or the [CH-2] key for
channel 2.
"000 AUDIO-1
O"
or "000 AUDIO-2
O"
will be displayed
3. Press one of the following keys:
[OJ
for off (the sound wi II be cut off)
[1] for on (the sound will be heard)
[2] for toggle (the mode-on or off-will be changed)
4. Press the [ENTER] key.
TO DECIDE WHETHER TO DISPLAY THE INDEX
OR NOT
You can decide whether the index is displayed or not during
playing a segment in this way;
1. Display the "000 FUNCTION?".
2.
Press the [INDEX] key and the "000 INDEX
O"
will be
displayed.
3. Press one of the following keys:
[OJ
for off (the index is not displayed)
[1] for on (the index is displayed)
[21 for toggle (the mode-the index is displayed or not-
will be changed)
4. Press the [ENTER] key.
22
LINE 042
Play
Segment 2
at slow speed
LINE 000
Advertisement
Table of Contents
