Page 1
VOICE SOUND LAST MEMORY 9. Wiring Diagram STANDARD SELECTOR AUTO PAUSE CANCEL CHANGE 10. Schematic Diagrams ƒR Design and specficatios are subject to change upon improvement without prior notice. • Samsung Electronics Co., Ltd. May. 1996. Printed in Korea. AH68-20127A...
Examples: Handle brackets, Metal Part metal cabinets, screwheads and control shafts. The current measured should not Ohmmeter exceed 0.5 milliamp. Reverse the power- plug prongs in the AC outlet and repeat. Fig. 1-2 Insulation Resistance Test Samsung Electronics 1 Ð 1...
Make sure that the 8. Always connect a test instrument's ground portion around the serviced part has not lead to the instrument chassis ground been damaged. before connecting the positive lead; always remove the instrument's ground lead last. 1 Ð 2 Samsung Electronics...
OLET ALTTINA NAKYMATTÖMALLE LASERSATEILYLLE ALA KATSO SATEESEEN! Market. VARNING :OSYNLIG LASERSTRÅLNING NAR DENNA DEL AR OPPNAD OCH SPARREN AR URKOPPLAD BETRAKTA EJSTRÅLEN! Fig. 1-4 Warning Labels (Location: Disc Clamper, Inner Side of Unit Door or Nearby Unit Chassis ) Samsung Electronics 1 Ð 3...
Page 5
1.6 mm distance from the objective lens Terminal. See diagrams below: surface on the optical pick-up block.) THE UNIT (1) WRIST-STRAP CONDUCTIVE SHEET FOR GROUNDING short short short short terminal terminal terminal terminal SOH-A1 SOH94T4N SOH91CI(CAR,walkman) (CMS-V10,CMS-V30) SOH91VI(LDP) (CMS-V10,CMS-V30) 1 Ð 4 Samsung Electronics...
Page 6
Make sure that the 8. Always connect a test instrument's ground portion around the serviced part has not lead to the instrument chassis ground been damaged. before connecting the positive lead; always remove the instrument's ground lead last. 1 Ð 2 Samsung Electronics...
Check VIC4 or Check for video signal at Replace VIC4 pin2 of NIC101 Check VIC5 Check for video signal at or Replace pin7 of VIC5 Check VQ4,5 Replace AND VCE23,24 Check Pattern or SMD Type parts. Samsung Electronics 5 Ð 1...
Page 8
Check for voltage at pin27 of Check VCW2 VIC105 is OV when power is turned on Check for signal at pin1,2,3 See “No Video” of AIC104 Check for audio signal at Replace pin13,16 of AIC104 Samsung Electronics 5 Ð 2...
Page 9
5-3 No analog audio(LD Analog) Check for audio signal Replace at pin4,15 of VIC6 Check Connection Check for audio signal between VCD and at pin5,7 of VCW4 MAIN PCB Check MAIN PCB Check Pattern Samsung Electronics 5 Ð 3...
Page 10
5-4 Voice cansel and change does not work Check for audio sound with See “No Sound” STANDARD mode Check Connection between Check for signal at VCD and MAIN PCB pin2,3,4 of AIC108 Check AIC108 or Replace 5 - 4 Samsung Electronics...
Page 11
Check CD Tray swich (LOW OR HIGH) Check pattern from Check for signal MIC1 to DRIC1 and pin5,6 of DRIC1 MICOM (PIN5:LOW,PIN6:HIGH) Check for waveform at Check DRIC1 pin2,10 of DRIC1 Check flate cable and CD Tray Motor Samsung Electronics 5 - 5...
Page 12
4. Exploded View and Parts List 4-1 Cabinet front parts 4-1-1 Exploded ploded view Parts list : DV7620KV Fig 4-1. Cabinet front Exploded View(DV7620KV) Samsung Electronics 4 Ð 1...
Page 13
4-1-2 Exploded ploded view Parts list : DV7622KV Fig 4-2. Cabinet front Exploded View(DV7622KV) Samsung Electronics 4 - 2...
Page 14
4-2 Main Mechanical exploded view and parts list Fig 4-3. Main Mechanical Exploded View 4 Ð 3 Samsung Electronics...
Page 15
4-3 Chassis Main Parts Fig 4-4 Chassis Main Exploded View Samsung Electronics 4 - 4...
Page 16
4-4 Clamper(2CD) Exploded View & Parts List PARTS DESCRIPTION SPECIFICATION Q'TY REMARK Fig 4-5 Clamper Exploded View Samsung Electronics 4 Ð5...