Yamaha DOM-30 Owner's Manual page 21

l
9. MIDI DATA FORMAT
2. POLYPHONIC KEY PRESSURE (AFTER TOUCH)
Data format: [AnH] - [kk] > [vv]
AnH = Polyphonic After Touch event (n - channel number)
kk = Note number (0 ~ 127 =C-2 ~ G8)
vv = Pressure value (0~ 127)
* Reception/transmission of this data can be turned ON or OFF using
the MIDI CONTROL mode AFTER TOUCH FILTER function.
3. CONTROL CHANGE & MODE MESSAGES
Data format: [BnH] - [cc] - [dd]
BnH = Control event (n =channel number)
cc- Control number
dd- Control value
(1) Control Change
If the byte format is correct, all control change message can be
recorded.
(2) Mode Message
ec PARAMETER
79H Reset all controllers
TAH. Local ON/OFF
dd
0
0
7BH All notes OFF 0
0
0
= OFF; 7FH=0ON
7CH OMNI OFF/All notes OFF
7DH OMNI ON/AI! notes OFF
7EH Mono mode ON/AII notes OFF 0
7FH Mono mode OFF/All notes OFF 0
* "Reset All Controllers" and "Alt Notes Off" not recorded
when the receive mode is set to OMNI ON.
** DOM-30 receive mode not affected by [7CH] or [7DH] messages.
*** Reception/transmission of this data can be turned ON or OFF
using the MIDI CONTROL mode MODE MESSAGE FILTER
function.
4. PROGRAM CHANGE
Data format: [CnH] - [dd]
CnH = program event (n=channel number)
dd = Program number
* Reception/transmission of this data can be turned ON or OFF using
the MIDI CONTROL mode PROGRAM CHANGE FILTER function.
5. CHANNEL PRESSURE (AFTER TOUCH)
Data format: [DnH] -> [vv]
DnH = Polyphonic After Touch event (n - channel number)
vv= Pressure value (0 ~ 127)
* Reception/transmission of this data can be turned ON or OFF using
the MIDI CONTROL mode AFTER TOUCH FILTER function.
6. PITCH BENDER DATA
Data format: [EnH] -> [cc] -> [dd]
EnH = Pitch Bender event (n= channel number)
cc= Least significant byte
dd = Most significant byte
* Reception/transmission of this data can be turned ON or OFF using
the MIDI CONTROL mode PITCH BEND CHANGE FILTER
function.
7. SYSTEM COMMON MESSAGES
(1) Song Position Pointer
Data format: [F2H] -> [11H] -> [hhH]
F2H = Song Position Pointer
11H = Least significant byte
hhH = Most significant byte
1 beat - 6 MIDI clocks
* Transmitted when the REW or FF buttons are used during STOP
or PAUSE.
** When received during STOP, the internal pointer is moved to the
corresponding position and playback will start from that point
when the START/STOP button is pressed.
(2) Song Select
Data format: [F3H] > [ddH]
F3H = Song Select
ddH = Song number
* Transmitted whenever a DOM-30 SONG NUMBER is selected.
** If received during STOP, the corresponding SONG NUMBER
will be selected.
8. SYSTEM REALTIME MESSAGES
(1) Timing Clock (F8H)
Transmitted during all run modes. Used as 1/96th-beat timing clock
when DOM sync mode set to EXT (external).
(2) Start (FAH)
Transmitted when run started from beginning of song. Causes run
from beginning of song when received.
(3) Continue (FBH)
Transmitted when a "continue start" occurs. Reception causes a
continue start.
(4) Stop/Pause (FCH)
Transmitted when a stop/pause occurs. Causes stop/pause when
received.
(5) Active Sensing (FEH)
Transmitted every 200 milliseconds. If not received for more than
400 milliseconds a NOTE OFF occurs.
9. SYSTEM EXCLUSIVE MESSAGES
All system exclusive messages recorded during RECORD. Blocks greater
than 1Kbyte, however, can only be recorded as initial data during REC
READY mode.
(1) Name Data/Bulk Data Request
Name data is transmitted when this data is received.
Status 11110000(FOH) ''System Exclusive''
ID No. 01000011(43H) ''Yamaha''
Substatus 0010nnnn(2nH) n=0(channel 1)-15(channel 16)
Format No. 01111101(7DH)
EOX 11110111(F7H)
(2) Name data
This data is transmitted when a Name Data/Bulk Data request is
received.
Status 11110000(FOH) "System Exclusive"
ID No. 01000011(43H) "Yamaha"
Substatus 0000nnnn(0nH) n=0(channel 1)-15(channel 16)
Format No. 01111101(7DH)
Byte Count
(MSB) 00000000(00H)
Byte Count
(LSB) 00010000(10H)
01010011(53H) "S"
01001011(48H) "K"
00100000(20H) "space"
00100000(20H) "space"
00110010(32H) "2"
00110001(31H) "1"
00110111(37H) "7"
00110101(35H) "5"
00100000(20H) "space"
00100000(20H) "space"
Version No. Obbbbbbb
Obbbbbbb
00100000(20H) ''space''
00100000(20H) ""space"
00100000(20H) "space"
00100000(20H) "space"
Checksum Oeeeeeee
EOX 11110111(F7H)
(3) Reverb Switch
Reverb switching occurs when this message is received.
Status 11110000(FOH) ''System Exclusive''
ID No. 01000011(43H) "Yamaha"
ID No. 01110011(73H) ""Clavinova""
ID No. 00000001(01H) "Common Device ID"
Special Operation
Code 00010001(11H)
Substatus 0010nnnn(2nH) n=O(channel 1)-15(channel 16)
Control No. 01011001(59H) "Reverb"
Control Value 0000vvvv v=0(OFF), 1(ROOM),
2(HALL 1), (HALL 2),
4(COSMIC).
EOX 11110111(F7H)
e The above covers all MIDI data available for general use.
20