Table of Contents
Advertisement
Switch
TO SWITCH ON THE MACHINE
(FIG. 17)
NOTE: Always pull the plug on the
cord set out of its receptacle when
changing a cutter or fitting the ac¬
cessories in order to avoid any
chance of an accident.
CONVENIENT SWITCH ACTUA¬
TOR PUSH UP FOR "ON" DOWN
FOR "OFF".
Using the Paraliei
Guide
A parallel guide is supplied
with
your router
to
increase
its versatility.
Assemble the guide as shown in
Figure 18. When it's fully as¬
sembled, insert the two bars through
the holes in the router base as
shown in Figure 19. Adjust as
needed for parallel routing.
The guide will adjust in all the
way to the cutter. In some cases the
plastic slides on the guide will
interfere with the cutter if they are
not loosened and pushed back to
provide clearance. Simply loosen
the two screws on each slide and
adjust it accordingly.
A fine adjust feature is included
on the parallel guide and is operated
by rotating the fine adjust knob,
shown in Figure 14. Turn the knob
clockwise to move the guide in
(closer to the bit). Turn the knob
counterclockwise to move the guide
out (away from the bit).
11 i&iiiiiiy
■
:
■
in
Advertisement
Table of Contents
