Table of Contents
Advertisement
2: Preparing the battery pack
To a wall outlet (wall socket)
1
Insert the battery pack into the battery charger, and connect it
to a wall outlet (wall socket) using the power cord (supplied).
• Place the battery pack on the battery charger in the direction of .
Slide the battery pack in the direction of the arrow as far as it will go.
2
Insert the battery pack into the camera.
• Open the battery cover, and then insert the battery pack while
pressing the lock lever.
This camera is compatible with USB-PD (USB Power Delivery). When a
device compatible with USB-PD is connected to the camera, fast charging
is possible. We recommend using a USB-PD device that is compatible with
an output of 9 V/3 A or 9 V/2 A.
CHARGE lamp
Lit: Charging
Off: Charging finished
Lock lever
EN
EN
7
7
Advertisement
Table of Contents
